On the "Cross" Already told about developing toys with their own hands and about the benefits that they bring to the development of children.
Developing toy "Pea Pod" It is intended for the development of shallow motility and as rattles at the earliest age, to study colors and teaching an older child's account.
The creation of this developing toy takes place in several stages. First you need to link the peas and the pod, and then attach the velcro so that the skids keep in the pod.
Necessary materials:
- Yarn "Iris" red, yellow, green and blue flowers for peas
- Yarn "Narcissus" Salad Color for Pod
- Syntheton
- "Lightning" 25cm, approximately to the color of the pod
- Three plastic containers from the bochyl
- A little bead
- Several plastic balls d = 25mm
- bell
- "Velcro"
- Threads in color to "Velcro"
- Hooks №1 and №1.3
- Sewing needle
Consumable reductions:
VP - air loopSBS - Column without Nakid
SSN - Column with one nakid
CS2N - Column with two camids
Prib - POSSIBLE (in one loop there are two)
UB. - Ubaulk (out of two hinges we encounter one)
Moroshina
First we connect for our developing toy multicolored peas. I knit them from the "Iris" crochet number 1. With such a thickness of the thread and hook, my skills are obtained with a diameter of about 4 cm.
Knitting scheme:
6 TBI in the ring amigurum. Next I knit in a circle.1 row - (approx) - 6 times = 12 fails
2 row - (1 scon, prib) - 6 times = 18
3 row - (2 fails, pribe) - 6 times = 24 fails
4 row - (3 fails, pribe) - 6 times = 30 fails
5 row - (4 fails, prib) - 6 times = 36 y
6 row - (5 fails, pribe) - 6 times = 42 fails
7 row - (6 fails, pribes) - 6 times = 48 fails
8 row - (7 fails, pribe) - 6 times = 54 fails
9 row - (8 fails, pribe) - 6 times = 60 fails
10-17 row - 60 fails
18 row - (8 fails, UB) - 6 times = 54 fails
19 row - (7 fails, UB) - 6 times = 48 BT
20 row - (6 fails, UB) - 6 times = 42 fails
After that, I put inside a bit of a bit of syntheps (Fig. 2), then the container with a noise filler with a lid down, rounded donyshk up (Fig. 3). I add a cintepon around the container, in the sides of the pea, using a wooden wand for the cuticle from a manicure set. Namely, her end, which is not sharp, and mowed. Next, add a syntheton as knitting, achieving a round shape of the pea.
21 row - (5 fails, UB) - 6 times = 36 SB
22 row - (4 fails, UB) - 6 times = 30 fails
23 row - (3 fails, UB) - 6 times = 24 fails
24 row - (2 fails, UB) - 6 times = 18
25 row - (1 fail-, UB) - 6 times = 12 fails
26 row - (UB) - 6 times = 6 fails
Cutting the thread, leaving the tail of several centimeters. I stretch the thread through the last sleeved loop. Then beetting it in the needle and, continuing in the direction of knitting, stretching the thread through all six columns, clinging only the outer wall of the loop. The needle introduce from the hole outwards. Then pull the thread, and the hole closes. Thread hiding inside.
Thus, the "ass" of the pea is as neat as "Makushka".
Similarly, I knit three more peas.
Fillers for Gorn
In one of my mines, the container with beads, which is finely and crumbly rustle, in the second - a container with plastic balls, they threaten the call, in the third - a bubblychik, he fuses and worship, and I do the fourth pea "dumb", just sting .
Fillers for containers in peas can be a different: rice, peas, coins, beads, buttons, a couple-triple of very small puments.
I tried to make a pea stuffed with polyethylene packages so that she is a rustle, but I did not work. I did not like that the pea was not the round enough, and the rustle is not very. Probably the packages are not sufficiently crust. It would be interesting to put a cook in the pea, as in soft toys, but I didn't have such a hand at hand.
Pod
Pod I knit from Narcissa Crochet number 13. This yarn is thicker "Irisa", so it must be borne in mind that if you unequance to replace another yarn, then the size of the pod and peas may not coincide. For example, the pod will be too small for the peas. When knitting from Narcissa in my scheme, the pod is obtained about 24 cm long.
Knitting scheme:
Chain of 50 VPAt the beginning of each new row, there is a lifting air loop,
At the end of each row, knitting unfold!
1 row - 50 fails
2 row - approx, 48 fails, prib = 52 fails
3 row - approx, 50 fails, prib = 54 fails
4 row - approach, 52 fails, prib = 56 fails
5 row - pribes, 54 fails, prib = 58
6 row - approx, 56 fails, prib = 60 fails
7 row - approx, 58 fails, prib = 62
8 row - approx, 60 fails, prib = 64
9 row - approx, 62 fails, prib = 66 fails
10 row - approx, 64 fails, prib = 68
11 row - approx, 66 fails, prib = 70
12 row - approx, 68 fails, prib = 72
13 row - approx, 70 fails, prib = 74 fails
14 row - approx, 72 fails, prib = 76
15 row - approx, 74 fails, prib = 78
16 row - approx, 76 fails, prib = 80
17 row - approx, 78 fails, prib = 82
18 row - approx, 80 fails, prib = 84
19 row - approx, 82 fails, prib = 86
20-23 row - 86 fails
It turns out a trapezium with truncated angles along the long side (Fig. 1). I knit two such details, then I add them together and taking the columns without Nakid for three sides (by inclined and in short). In the angular hinges (stupid corners of the trapezion), there are two columns in the loop, so that the corner is careful (Fig. 2). Then turn. It turns out a kind of boat (Fig. 3). And I bind the top of the "boats" by two rows of columns without Nakid.
1 row - 81 fails, 5 UB, 81 fails = 167
2 row - 81 fails, UB, 1 failover, UB, 81 fails = 165 fails
The accumulation is made so that the pod can get a neat "ass", and in order for her beautifully hid the end of the "zipper" (Fig. 4).
"Lightning" I sew from this very "end" to the "beginning". First one side, then another. Seving the same thread from which I knit a pod, short stitches. From the inside it looks like in Fig. 5, and outside the thread is lost on the background of the pod and is not noticeable.
Pod's tail:
8 ISBS in the ring amigurum
1-17 row - 8 fails
18 row - (1 fail-, prib) - 4 times = 12 fails
19 row - 12 fails
20 row - (1 injection, prib) - 6 times = 18
21 row - 18 fails
22 row - 18 fails
23 row - (2 fails, pribes) - 6 times = 24 fails
24 row - 24 fails
25 row - (3 fails, pribes) - 6 times = 30 fails
26 row - (SBF, SSN, 3 SS2N in the next loop, SSN, ISP) - 6 times (6 petals)
27 row - (2 fails, 3 pribes, 2 fails) - 6 times = 60 fails
Leave a sufficiently long thread, which sewing the tail to the pod of secret stitches
(Fig. 6 and 7).
If you knit a pod from another yarn, then you need to lay out all the peas in a row, and from yarn selected for the pod, tie a chain of air loops, the length of which should be equal to the length of the row of peas. Next to prick one row of columns without Nakid. In each next row in the first and last loop of a number to prigid. Thus, with each number of columns in the row increases by 2. The width of one part (halves of the pod) is slightly smaller than half the length of the circumference of the peas. That is, you need to continue to knit rows with additives, while the width of the part will not be almost equal to half of the girth of the pea. Only the last four or six rows to lie without add-ons.
Velcroe
The rigid part of the "Velcro" (the one with hooks), sew the pod to the bottom (Fig. 3). And for the peosters, I cut the rugs from the soft part of the "Velcro" (Fig. 1), because the kid's pea will actively explore the mouth. Kruglyoshi sewing on the "ass" of the peas (Fig. 2), because, as they twist, "Makushki" in terms of accuracy I always like more.
Polka dot is ready to eat!
You can also make such a developing toy with your own hands.
