- Before working, find a lower point in the ceiling and "beat" the plane of the baguette from it. In the baguette there are already holes for installation at a distance of 14 cm. According to the hole instructions, the holes must be located every 7 cm. Holes to install the usual drill. If the already attached baguette is drilled, then the drill on the concrete can launch the holes. We set the baguette on the conducted line on the walls and the bruus on the cabinet first on the quick-drying glue, and then on the dowel.
We establish a substrate under the chandelier to the height before the stretch ceiling. The substrate in the area is equal to the base of the chandelier. Cable temporarily refuel inside
Find centers for all four sides of the baguette and stretch ceiling
- Fresh cloth to one side.
- We refuel the canvas with a special trowel. Taste desirable to lubricate dry soap so that there is a better slip.
- We go around the corners.
A sharp knife on the spatula is cut off excess.
We find a substrate for a chandelier and make a hole for the cord
- We close the cut by a special pipe overlay for the pipe. Pipe trafficking is made by the method of saws of a sawdust shape so that the back of the fabric is free to converge. Remains refuel the ceiling plates.
The ceiling is perfectly smooth. The chandelier took its place on the ceiling. The clock dropped 4 cm.