In this master class, I will tell you how to sew a container-box for storing toys, yarn and all small things. The box is quite large in size, but at the same time light and practical, easily erased in a washing machine.
To work, we will need:
- 90 cm of the main fabric, with a width of 150 cm.
- 90 cm Fabric for lining, with a width of 150 cm.
- 90 cm of Slimetex or Singrytegone, density 150, with a width of 150 cm.
- 9.5 * 74 cm Fabric for handle, you can carve out of the tissue of another color.
- 74 cm Slings of any color, 4 cm wide.
- 3.5 * 125 cm for beaks.
1. From the main tissue, we cut a square 40 * 40 cm, navigate it on the slimtecle and cut the circle with a diameter of 37 cm already in the allowance, no need to add.
2. From the main tissue, we cut a rectangle 48 * 120 cm, also shift on the slimtecle and cut the rectangle 45 * 116 cm, sew it into the pipe.
3. To the bottom of the pipe, we pour a circle with needles (bottom), then stepping by car. The main part of the goiter is ready.
4. For lining, cut the rectangle 45 * 116 cm, sew it into the pipe.
For the bottom, just as in the main part, we cut the square first, we shoot on the slimtex and only then we cut the circle with a diameter of 37 cm. In the bottom of the bottom we should also have a rustle!
5. The lining pipe is spinning with a circle with a circle (bottom) and stepping on the machine.
6. Now we have two identical blanks - pipes, one of the main fabric, the other of the lining.
We turn on the wrong side of both blanks, we rush two pipes with episms each other, exhaust to the wrong one!
And stepping on the typewriter along the edge of Zigzag. Thus, we turn out a more dense bottom and with washing part of the rush will not fall apart from each other.
7. Soak the workpiece on the front side, we roll the lining with the pins with the main workpiece from the top of the pipe and stead the car by the very edge.
8. For the handle, cut 9.5 * 74 cm rectangle, you can another color.
9. Start over the entire length and one short. The photo shows how the line passes. Cut the corner.
10. Soak, cut off the tip of the workpiece (stroke short side), smooth the workpiece so that the seams go through the middle.
11. With the help of the English pin, insert the sling and spend 4 seams, the workpiece has become similar to the handle!
12. We fold our box in half, we find the middle and pins pens pins. We feed the handles by car along the very edge.
13. For Beaks, cut out a strip of a cloth 3.5 * 125 cm with a margin! We begin to sew the faces on the top front of the box, leaving the tip of the fairytale 5-7 cm and finish without reaching the stitch before the start of about 5 cm. The photo shows what it turns out.
14. We fold the place as it should be closed into the ring. I make clear bends with your fingers, as if aligning, just not much so as not to stretch the fabric.
15. We shift a short part of the beacon to another and I spoil the pins. Only beyk, without grabbing the box. You can draw the folding line with a marker. Start fairy through the line.
16. Beekes with us closed into the ring, cut off the unnecessary and sew the remaining portion of the Beach to the box.
17. From the wrong side of the box, the bays are sewn with hands with a secret seam. In turn, enhancing a needle - first in the box itself at the base of the line, then in the edge of the bakery.
18. Our box container is ready!