The execution of this jacket is available to almost everyone. It is enough to know what a column with Nakud. And the effect of the finished thing will depend only on the choice of fabric and your taste. Everything else is very, very simple, nothing will have to cut, and even optionally the presence of a sewing machine.
The original jacket design was caused actually lazy and a small amount of fabric - only 50 cm long (that is, it is extremely problematic to cut from such a quantity).
So you will need:
- Lace soft double-sided fabric, imitating manual knitting (according to the composition it can be cotton or mixed fiber). For size from 42 to 50, with a rise from 160 to 170 cm, it is necessary to 0.5 m long and 150 cm width.
- Threads for knitting 2 contrasting colors (№1 is thorough - I have it half a half, №2 Pottomen - I have "Iris") and threads number 3 for the color of the tissue of threads No. 2 (I have "Iris"). In general, pick the thickness of the tissue under the thickness of the fabric, and, accordingly, the hook number under the thickness of the thread.
- Ready strap (with buckle) for taking about 1.3-1.5 cm wide (or you can make it from belt tape and buckle)
We begin with the fact that we choose the facial side of the tissue and measure from one end 50 cm, and from this point we begin to tie the neck from this point, the length of the shelves, that is, the front parts, 50 cm, the remainder of the neck is also 50 cm. But it is necessary to bind so as to pull the neck line up to 40 cm. On such a lace tissue it turns out easily and naturally: we enter a hook into the fabric, converting it to the wrong one (about 1 -1.3 cm) - as if a niche for the neck is formed, and we bind the column without Nakida:
After the first row of the binding the jacket looks like this (check that the shelves are equal in length, and the neck was pulled up to 40 cm):
Turn knitting and reinforcing the previous row by a column with Nakud:
Do not cut a thread (we will finish knitting). Next, we take threads number 2 and we are tied up with a chain of 5 air loops, a sticking hook in the posts of the previous row and ticking the semi-brackets:
Last row knit threads No. 1 by a column with an attachment, a hook Introduce under the loops of air loops:
Now you need to handle the shelf lines (transition). To do this, we take thread number 3 - those under the color of the fabric, and we are taking the line of each shelf from the neck to the bottom of the column without an attachment, entering the hook into the fabric (as it did tied the neck, but now nothing is tightened and not flexible ). The photo shows the first row brown threads. This series is needed for accuracy, it seems to coach and lines the cut. And next, already in this row knit threads No. 2 of the columns with Nakud - we enter a hook in the bar of the previous row and invested in each 3 column with Nakid - create a wave-like line:
And we finish the binding with multiple loops in chaotic order (3, 4, 5, 7.9 air loops): knit, for example, 5 air loops, stick the hook in the previous row column, insert the semi-solitary, then 8 loops, semi-sololbik, then 3 loops , semi-sololbik, then 6, etc.:
As a result, it turns out such a wave "terry" edge of the shelves:
Now you need to work on the opposite cut of the fabric and create sleeves
Here it looks like this seam in finished form from the front side:
And yet, I draw your attention to the edge of the tissue line. In my case, it looks good - as a complete knitting, and therefore I did not cultivate it further, but left as it is. In case the edge is not neat, then pre-process it (fastening and running or also by hand with a needle).
And finish work on the jacket in that we process the edges of the so-called sleeves here: we fell the edge twice (earnings), we press the line on the typewriter or again gently manually by needle:
As a result, here such a face of the turtle is finished jacket from behind
And here is such a sea slope in front
Now you need to make a strap suitable under the jacket. Of course, you can make the base of the strap by bossing the belt and buckle, but my advice: buy for this purpose a cheap strap suitable or neutral to our colors jacket and with the same buckle. It is much faster. Pay just attention - the buckle must be sufficient width so that you can pass the baked belt. So, knit a chain of air loops with threads No. 1 with our belt (or cm on the 3 shorter, usually the length is increasing. But there are no universal tips. It all depends on the threads and density of knitting. Therefore, if you make a mistake, you will have to tie):
Next, knit on this chain of columns with Nakid:
Then knit threads No. 2 with a chain of air loops of 5 loops, that is, repeat the drawing of the neck of the neck:
Next row by column with Nakud threads number 1:
So in the end looks like a facial layer of belt:
We choose the involnee side and from this side we begin the strapping of the back side of the strap threads No. 3 - I have this "iris" (pick up the color of the fabric or under the face of the front side of the strap). To do this, we cling the hook for the edge (and for the neighboring loops, so that it is not noticeable from the front side) and we bind the column without Nakida:
Next, knit a number of a column with Nakid:
And the next row by the column with Nakid (in the photo the end of the strap, from where the buckle will leave, so we leave it open):
And the final row knit is already with the strap: knit columns with Nakid, while clinging to the back wall of our knitted strap and tissing the semi-brass:
We finish knitting the fact that we fasten our belt belt in the back of the buckle, cut off the thread and refuel it. The finished strap looks like this:
This jacket can add and decorate your everyday or even an evening image. It can be combined with skirts, dresses, jeans, trousers, shorts. I wish you success!
A source