In the presence of fantasy and minimal efforts, it is easy to build an air humidifier with your own hands. It will save money and keep health in the cold season. We will tell you more about how to do it.
Air humidifier with his own plastic bottle
When the heating season begins, the problem arises how to maintain the right microclimate in the house. The lack of moisture is negatively reflected both on the furniture made of wood and indoor plants and the well-being of households.
The human body reacts to a long stay in a room where there is no optimal humidity, a decrease in immunity, drowsiness, fatigue, eye inflammation, an end in the throat and other unpleasant symptoms.
It is possible to moisturize the air in the room in several ways. Among them are those that do not require special efforts:
- Take the room plants such as orchid, hibiscus or ficus, which are able to moisturize the air.
- Buy an aquarium, the evaporation of which will be created in the room the necessary level of moisture.
- Regularly make wet cleaning.
- Sew folded underwear indoors.
The improvised humidifier of the air is also easy to make those materials that are at hand. For example:
- Put a metallic vessel with water on a centralized heating battery.
- To keep the containers filled with water near heaters.
- Hang a wet towel on a warm battery. Alternatively, one of the ends of the towel is omitted into a vessel with water.
- Moisten a dense fabric and hang on the floor flying or heating pipe. Put behind the usual fan.
But most of the folk craftsmen to the question of how to make an air humidifier with their own hands, they advise to attach some efforts and use plastic bottles to make a hooper.
The first version of such a humidifier is extremely simple. For him need:
- Plastic bottle 1.5-2 liters.
- Wide scotch.
- Scissors.
- Slices of fabric.
- 1 m marl tissue.
The sequence of manufacturing a humidifier is as follows:
- With a side of a bottle with scissors, it is about 12 and a width of approximately 5-7 cm long.
- Attach the bottle into the heating tube with the help of fabric.
- In those places where the bottle and fabric come into contact, make fastening with scotch.
- The gauze tissue is folded with a strip of 10 cm in width and length up to 1 m.
- Washed the battery with a gauze strip, lowering one horses water, pouring into a bottle, using the hole.
Using plastic container, you can make an automatic humidifier.
For work needed:
- Large capacity (10 l).
- Fan for computer.
- Scotch.
- Knife or scissors.
The device is manufactured in this way:
- The knife is cut by the neck and the holes are done.
- The fan is fixed with scotch on the site of the sliced neck.
- Below the holes are poured water.
- The device is ready when the fan is included in the network.
How to make an ultrasonic air humidifier do it yourself
One of the safest humidifiers is considered ultrasound. The principle of its work is extremely simple: ultrasound with high-frequency oscillations turns water into the fog cloud, which is sprayed with a fan.
In such devices, it is necessary to pour only purified water, as if, with evaporation, harmful impurities are settled and steam remains clean, the ultrasound turns them into fog and they can settle them in the room along with moisture.
In order to make an ultrasonic humidifier with their own hands, you will need:
- Ultrasonic fog generators.
It is better to buy them in a metal case and immediately with the power supply.
- Cooler with 24 volt power supply.
- Decorative grille on the cooler.
- Food container with lid.
Capacity, transparency and color can be chosen based on their own preferences.
It is worth navigating the volume and design of the room in which the device has to work.
- A piece of foam, which will keep fog generators at the necessary depth.
- Plastic bottle with a capacity of 0.5 to 1 l for nozzle.
- Termocles.
The algorithm for assembling an ultrasonic humidifier for air is as follows:
- In the lid from the edible container, do 2 cuts for the fan and nozzle.
- Attach the cooler to the hole done with a thermoclaus.
- A plastic bottle trim a donyshko, insert into the hole for the nozzle and fasten with the help of a thermoclayer.
- From the reverse side of the cover, it is necessary to fix the plastic screen for the cooler so that the moisture does not fall into it.
- Attach the foam platform to the foam platform on the back of the cover, so that it is located only at the inlet edge.
- From the side of the container to make holes for cables and rubber plugs of the fog generator.
- Fill the container with clean water. Close the lid, run the cooler and fog generators.
Such a device is simply exploited, but it is important to wash it periodically, merge water and dry.
The humidifier for air will not only support the necessary level of humidity, but also will not give dust flew around the room.