Author of work and master class - Baskhatova Alena
Required materials for weaving cactus:
- Small beads number 10 green, light green and green colors
- Beads Orange №10 and №15
- Beads Yellow and Light Yellow №10
- Beads white and transparent number 10
- Beads Golden number 10
- Bead Oval Salad Color
- 5 faceted yellow beads 3 mm in diameter
- Wire under the color of beads 0.3 mm and for a rod 2 mm in diameter
- Green threads and glue
- Pot with pebbles
- Gypsum
Weeping trunk cactus
For the trunk, we need to weave 6 pointed leafy of French weaving technique. One sheet consists of 14 full arcs where the latter is dialing from a light green bead. Type 20-22 bispers, it will be the first row, around which you will already do arcs. Purchase leaves, then fold in half and spend the center between yourself in several places. On the edge of the leaves are fixed with each other, which consist of wire. You need to cut 2 wires 2.5 cm and 3 cm, twist these wires so that 4 identical end sticks out, and the base has been twisted together. Needles can be entrusted. Leave the hole on top to insert flower there at the end.Weep flower cactus
The flower consists of three species petals, pestle and stamen. Control the scheme 1 glower 10 small petals, to do this cut the wire 42 cm and pleading guided by the drawing.
According to the circuit 2, glossing 7 medium petals. To do this, cut the wire 80 cm and work in the drawing. At the end of the petal, by the center.
According to the scheme 3, glossing 7 large petals. Cut the wire 90 cm and finished petals in three places, as it is very large.
Weep stamens and pestle
The stamens will need two species of 5 pieces, a 35 cm long beads in such a sequence: 5 yellow-salad, light yellow and white frosted color, the last golden. Now return back through all the beads, without passing the length through the golden. Iniquitably repeat exactly the same stamens 4 times. The second set of stamens woves the same, but dial not by 5, and 7 bisper and the latter will not be a golden bead, but a 3 mm bead. Insert these 5 stamens into a salad oval bead.Assembling cactus
To the stamens in the bead, take a 2 mm wire, then around the stamens, after the stamens, take the little petals, then medium and large. Cut the leg tightly with green threads and proof glue. Insert the flower into the cactus. Cactus Place in a pot, fill with plaster and decorate pebbles or pebbles at the end.
Source: http://biserok.org/kaktus/