Very often in our life it happens that the simplest things are also most effective. The season of large-scale cleaning of potatoes will begin. Surely in the summer village of most fellow citizens at least someone has a working motoblock. However, not always the host of such a miracle also has agricultural gardening equipment to it. Fix it easily, because it is not difficult to make a simple, but effective plow to select potatoes is not difficult.
What will take: Bolts and nuts M10, reinforcement 8-10 mm, silicon cultivator paw, strip 40x4 mm, razor paws
If you managed to get all of the above and prepare all potentially necessary tools, then collecting potatoes with your own hands will no longer be much difficulty even for a beginner. The main burden in the future design takes on a silicon cultivator paw without a rack. It should be accepted on the sides of one panel. After that, the metal strip of 450 mm is welded to each razor.
In the upper structure of the structure there are two holes with a drill of 10 mm, after which there is welding of the veser. The first 30 cm long armature is put in the center so as to be a symmetrical sides of the design. The second fittings are put and welded, and then each subsequent. The fan should be attached to the reinforcement under a slight bias up.
Next you need to make traverse for attaching paw racks. The easiest way will be to assemble the P-shaped structure of 3 metal bands. Motion fastenings are made using a drill strictly in the construction center. When the design is assembled, you must not forget to pretten all the seams and remove rust.
