Built myself such a boat. Two navigation - normal flight. Everything went about a year. Built himself on weekends and a couple of hours after work.
The first descent.
This is September of this year.
Form keel.
Location and cut the items.
All details are cut.
Start assembly.
Deck.
Board.
Luke Anchor Box (Look).
View from the stern.
See more.
Superstructure of cutting. (Seen paper part of the construction site)
Cut out "lumies", covering the cut.
Private hatch blanks.
Luke is ready.
Perorally made steering wheel.
The steering wheel is ready.
And naturally, the feather feather itself.
Type furniture.
Folding table and battery box.
Was launched.
Sewing cockpit.
Cut the hatches for the runes and dried completely cockpit.
I unscrew the screws and soot all on the sewers (wooden pegs).
Assembly mast.
The knot of the mast and Kardan Gick.
I crossed the mast (mast, gic, gafel).
Storm.
Well, all the hatches still.
Trusted Bushrit (the stick is that on the nose sticks out)
Departed the cabin. Dust inside nemeryano.
Began to make akin.
Stayxel and swear spin.
I do not remember how it is called.
Finished punets.
But this is called - soft talp.
More Delnyak - ducks. All made of mahogany.
Blocks for running rigging (rope). Rollers from caprolon on bearings.
And the beginning of the funniest-vigorous process, fiberglass and other operations.
After pasting, putty is walking, to protect the fiberglass from the damage fur, and to remove the surface. This is not the last layer.
Cockpit is saves and partially propatlevan.
The top of the boat is Pripatlevan and partly sanding (cockpit).
In the bucket epoxy resin, and in bottles a hardener and plasticizer.
Coup of the boat and the beginning of the bottom pasting.
Skinned all the edges and joints with fiberglass tapes.
Intega and cut fabric.
On the bottom and side of 3 layers.
After pasting - putty.
After sanding.
Repeated spat and grinding, this can be done to infinity.
Boat prepared for painting.
Painted.
I left the metal strip for protection.
Again the coup and another prostate.
Crash.
Finishing of a private bar and splashing room.
The assembly and setting all the details.
Cockpit.
I dragged on the boat and dragged on the street saw the light.
Tried a motor. Pantograph for motor - homemade.
Although in the project the sizes of sails and there, I decided to double-check. Fabrics a lot, a lot of work, it's a pity.
As Silos sewed, I think not interesting.
Cut out the name of the boat.
Installed.
And this is why it was still treated.
Seasal in campaign.
That's the whole story. The season comes to an end, to a meeting on the water next year.
A source