- Price headset: $ 1250
- Area: 6 sq.m
- Layout: Corner
- Furniture Color: Green
- Facades: Unknown
- Style: modern
- Association: No.
- Gender: Linoleum
- Apron: Plastic
- Ceiling: Plasterboard
Apartment Khrushchevka, kitchen 6 square meters. meters. That's how she looked before repair. As you can see, there are very few places, and you have to store part of the utensils on the cabinet.
The first thing that took was to do is create your own project, taking into account all the wishes of the spouse. I had to pump a bunch of programs, but as a result, Proplan program was most convenient, from Blum. She clears the lockers at once under their fittings, even though I did not put it. Therefore, I had to adjust the retractable lockers where the ball guides put
So, proceed. First of all, change the window, and pull out the windowsill. There will be a tabletop.
The window was let down just below, 8 cm.
Masters put a new window. As you can see a frame of different widths, made for the convenience of washing windows and ventilation. In the meantime, put an old kitchen for sale and it came and took it during the same day, she left under Krasnodar, to the village.
Determined with appliances in the kitchen. We will put the gas panel and electric oven. And since there are no wiring under the cabinet, so we carry out the wire into the shield. The perforator was repaired (the neighbors hello!) And lasted to the ceiling. Ceilings are plasterboard and therefore the wire was paved inside the design. Distribution boxes, too, behind the ceiling - How I remembered the old owner of the apartment. I had to sweat and embed these shelters in the ceiling. The cable used the VG NG 3 * 2.5.
Hatch.
Still hatch.
Put in the shield diff automatic.
By the subsidence led to the cable channel.
Well, once I took the electrician, then we put the outlet immediately.
But this outlet turned out by chance: when I put a socket on the reverse side, I saw a lacquered hole in the next room. I could not help but take advantage and carefully put a socket there.
Having pleased the quality of sockets. Ceramics and spring-loaded contacts.
Slowly remove the garbage.
My second half helps.
While we are waiting for the crookedly ordered by our drawings, the door came to the room next.
We put a loop.
Ready!
Comesed and brought cut. As usual this happens at an inappropriate moment, the starter broke the car, started together with the pusher in all trips. This is the necessary minimum of the tool, without it, especially confirmable drill, angular clamps.
The spouse continues to help under my sensitive leadership.
So, we collect and install.
The gasman came, turned off the old slab and connected a new one.
We drink under the sink, carefully smear all sections with silicone.
We collect the retractable lockers, the bottom did 18 mm from the fiberboard, as it is supposed to be a big weight when storing croup, pasta and other things.
We drink under the gas panel, just all siliconyl.
The facades arrived, drill the driver of the opening hole under the loop. Be extremely attentive, so as not to drill through.
Saw.
We proceed with sandpaper.
We take new furniture skin and tighten.
It turns out not bad.
Frame chairs painted in the subsidence, such chairs turned out.
We continue the assembly.
The space under the windows side of the tabletop is decided to close this design.
Since the handles will not be on these facades, it was decided to use a cheap analogue of Bluuma Tip-on. So as not to buy expensive flawed hinges for such a mechanism, just pulled out the springs from ordinary loops.
Here is a latch with a magnetic holder.
Something is evaporated.
Already something.
Ordered two aluminum facades. Hood.
When buying an exhaust, pay attention to extraneous sounds when the engine is rotated, I had some scratching, cured disassembly and pulling the engine mount to the protective frame. Lamps are replaced with LED.
On the upper cabinets everywhere there are mechanical signs. From the hydraulics refused due to the fact that it raises the full opening and then close only with the chair. And mechanical allows you to open exactly so much as needed. That aluminum facade, which is in the photo, stands with a hydraulic and mechanical lift and can stand in any position, heavy gave infection.
Next went to the market and bought plexiglas, I forgot how it is called correctly. I drove into the advertisement and took the seal on the skinli (apron). Next, carefully wiped dust we pasted the film on the glass. Glued to soap water
I turn over.
It turned out just perfectly. From the real kalenic glass refused in considerations of possible chips and the absence of the opportunity to grab raling with hooks and jars. The same glass is withstanding the heat and is not afraid of shocks. I mounted it on remote holders.
Next, proceed to the most unloved process - wallowing walls by wallpaper.
Next, hang LED ribbon in the profile. And we are waiting for automation from China, turn on and off will be the touch of this profile, the RGB tape, the selected program on the controller is saved when the power is turned off. While the test mode was stamped from what was.
From the remains of the countertops turned out a great table, bought only legs.
That's all, the kitchen is ready, 1 month came out of time, now calculations for money.
| what | How much costs, cu |
| Dishwasher | 250. |
| Oven | 150. |
| Gas panel | 188. |
| Hood | 70. |
| Plumbing and linoleum | 124. |
| Tool, plinth, countertops, screws, etc. | 213. |
| Cut chipboard (Facades Egger, Basics of cabinets from inexpensive manufacturers) | 735. |
| GTV fittings (all loops with a closer) | 105. |
| Window | 265. |
| Chairs (update) | 53. |
| Electrician | 33. |
| LED backlight | 31. |
| Skinali (apron) | 146. |
| Table | 23. |
| Lamp over the table (on the photo only wires under it, still travels from China) | fourteen |
| Realits and suspensions | thirty |
| Pharmacies and other things | 10 |
| TOTAL: | 2440. |
Some photo of the finished kitchen:
On the question of the lack of a refrigerator I will answer: he fits well in the corridor in a niche.