If you need a cloth of flap, equally neat on both sides, use this lifehak.
This lifehak can come in handy if you decide to sew from flap, for example, a single-layer lung bedspread, a fantasy tablecloth or, as in this example, an unusual curtain. In these cases, it will be necessary for the canvas gently looked not only with face, but also from the wrong side. How to achieve this, told in the master class.
You will need:
- flaps of different sizes;
- disk knife and mat substrate;
- metal line;
- sewing machine and threads;
- Iron and ironing board.
STEP 1
Our fabric does not imply any pattern of setting up the pattern: its assembly is solid improvisation, variation on the topic of Crazy-Patchwork technique. Templates are not needed here. Select the flaps from which start, and firing its edges.
For example, we will make it rectangular. Cap the second same rectangle from another fabric. Fold the Loskutka face to face so that the edge of the lower part spoke from under the top by 1.3 cm.
Lay the line, retreating from the edge of the part, which lies from above, 0.6 cm.
Expand the details, reveal them and start the allowance to the side of a larger point.
Wrap a short switch short and start the allowance so that the raw edge is inside.
Load the line by locking the allowance. Yes, in essence it is a winding seam!
Step 2.
Pick up the following item.
Connect it to the canvas in the same way as described in step 1.
Continue add details. The main thing is to ensure that the canvas remained flat.
Step 3.
Collect some large sections and push them so that one can make a single canvas.
Connect the sections in the same way and process the edges. Ready.
Photo and Source: CloseetcorePatterns.com