Master: "Do it - Your Washingwash will never break!"

Anonim

It is difficult to imagine a modern apartment without a washing machine. We put things inside, press the button and after some time we get them clean and dry. In order for the iron assistant to serve you for a long time, you need to ensure proper care. To avoid the appearance of scale, smell and mold ... The master told!

Cleaning washing machine

Master:
According to statistics, the main causes of breakage - the formation of scale on the electric heater and the filter zoom. Regular cleaning of the washing machine from scale and dirt will allow it to work much longer.

How to Clean the TEN from scale

The TEN (tubular electric heater) performs the function of heating the water in the tank of the washing machine to the operating temperature. If the number of impurities in water exceeds the norm - the risk of the exit of the Tan is not very large. With each wash, the layer of scale is becoming more and more, and in the end, the machine stops working.

Cleaning lemon acid

Skip consists of salts of metals, and to clean it, it will take acid. The easiest way to use citric acid. On a washing machine with a volume of drum 5 liters, it is possible to take 100-120 g. Pour the acid into the powder tray and launch washing at 60 degrees for 1 hour and more. In addition to the Tan, this method will help to clean the drum of the washing machine.

Cleaning vinegar

To do this, in the Powder tray, we fill with a 200-250 ml of 9% vinegar. Vinegar is capable of clearing the TEN faster, but due to its aggressiveness can damage the rubber parts. Clean the car with vinegar or not - to solve you.

Some masters are offered when washing regularly add soda to washing powder. Soda helps to soften the water, eliminates the unpleasant odor and slows down the formation of scale.

Cleaning the fuel pump filter

If you allow strong filter pollution, the drain water can go up and break out. To prevent this, it is recommended to regularly clean the filter. Make it easy. The filter is usually located on the bottom of the facial surface of the case.

Master:

Open the hatch, pre-inspired something to the floor: it can pour out to the liter of water. After that, we unscrew the cover counterclockwise and remove the entire accumulated garbage. It remains to wipe the hole, spin the lid and install the decorative panel in place.

Cleaning the removable tray for powder powder

Over time, contamination, mold and even fungus are formed on the surface of the tray. In the process of washing, all this in contact with the drum and our linen. Clear the container is easy, as it is removed from the washing machine.

We will need an old toothbrush, soap and tool for cleaning the toilet. Dirt and mold can be removed with a brush and soap. To remove the flare, use the toilet cleaning agent. Fill 20-30 ml to the department and leave for 1-2 hours. The procedure is simple, so you can repeat it after each 5th washing.

Cleaning under sealing

Mix the bleach with warm water in the proportion of 1: 1, we wat the cloth and wipe all the inner surfaces. If the contamination is very strong, we leave the cloth moistened in the solution for half an hour. After that, once again we proceed with a toothbrush.

Cleaning the seal

The network you can find numerous videos with the tips for caring for the washing machine. Here is some of them.

A simple way to clean the washing machine with citric acid. Drum and Ten will be like new!

The master recommends that the soda is added to the washing powder for the prevention of scale formation.

How and the easily clean the washing machine? Detailed instructions.

A source

Read more