When there is nothing to lose, you need to relax and enjoy. What I did. Made a vastern from the blouse. Bought in Sonfea to the flaps. But "suddenly," not without the influence of a competitive excitement, I wanted, "Werey" so worked, and did not lie next patchwork in the drawer of the chest.
Pustern - Dial. Also in meaning. "Bid, Barynie's home apparel", Uralsk. (Dal), derived from Franz. Toujours "Always, constantly". I also got a Tasour-Chapan (Chapan also segged and, as a rule, striped is a very colorful traditional clothing of Central Asia).
Photo of Blouse "To" - Classic genre, and even from satin. But! The color scheme did not give me rest. Collar Corches - gently love and regret that fashion has passed. Cotton satin is more suitable for home things, I think it is quick enough, and clothes "for the city", it seems to me, looks rustic from such a fabric.
And "after" - show a fragment - without intrigue. After all, it even got a glasswork. But he lay in stock from 91 years!
For the manufacture of a tuber, two main things were used: a striped satin of a simple clay blouse, a silk shirt for lining. And the auxiliary fabric of suitable color (I used a knitted T-shirt). The color is needed in order to arrange a coquette and a rear of Niza in Sinel technique. For stitches, a non-footing sintepon is chosen - No. 100
From the tools you will need: plowed, scissors are small with sharp ends, English pins, threads of two colors, scissors for cutting, footage, sewing machine.
In full silence I hear how the alarm clock is called by an annoying buzzer - the neighbors behind the wall. I look at the clock - 6.30. But I'm already at the table - work boils!
You need to neatly resort the details, rinse them in water to dissolve the races. Soothed in collapsed form. Not ironing (not the format). Pullocks leave.
I decided to arrange a Sinnel in the technique of Sinel - an experiment, so to speak. Deciding with the width (8-9) cm, I note the line, then I launch the Silka and flashing in the Silkam, it is a border that determines the site that will then be cut between the line.
The layer, repeating the shape of the coquetki and the edges (rod), at the bottom laying up to the wrong one.
Following the layer of syntheps and below the lining. I'm smoking. Little. Maximum line width (4-5 cm). There is a nuance - about him under the photo. Foot conveyor. If it is not - it is better to purchase. If it is impossible to purchase - choose the minimum pressure of the paw.
The width of the stitch on the coquette and the edge is less (about 2.7 mm). What for? Then that when we cut the cloth between the seams, the wide step does not hold the Mahru - it goes out of control, crawls. I understood it only when cutting. I cut it too early. And somewhere to cut is not necessary - about it next. In general, in sewing the main thing - all operations are performed consistently so that it was not painfully insulting for a spent light day
If the back is closed without problems, then the shelves need to take into account the presence of a side. Hide sintepon, layer and lining under the board. You can pinch or notice to the shelf.
After the stitch, the shelves are left not yet sewn.
When all the details are sebagon - time to process sections. I cut the strips of the desired length from the remaining details of the silk shirt. The collar was miraculously enough for the side sections, and the coquette went to handle the sleeves
Strips sewing as hopping, first face to face, stretch the width of a little less than foot. Enveling the cut and laying the seam "in the groove".
It is impossible to iron. But it is necessary to grab the cuts. Therefore, the seams put on the edge of the ironing board and apply hot iron.
Pressure without overlighted pockets - not a pub (but the chapan does not imply the presence of pockets). When the question arose about the pockets, there were inconsisors of a different nature - how to fit the strips - I realized, but I did not like the imposition of the pockets to the edge of Niza, but to make small pockets on the waist line - Nomomilfo ... and I, as in school years, I postponed the decision Hard task and went to solve the decision of which he knew. While my physical body was corpled over the shoulder seams, astrally requested the answer from the universal mind. The answer was sent - simple to genius: Instead of Pockets, a purse - the cuff cuffs are large enough, I'm going to use a glasswork in the reservoir, and therefore the bag decor with the same glass frame will elaborate, and, accordingly, the whole composition will be easy to read. After all, I seen a look fur for walking? So, the handbag will be appropriate.
Hooray! Minus one day, which would have gone to the manufacture of pockets.
Sections processed. Seams of irrigated. I turn to ... processing on the side on both shelves. The loops do not interfere, as far from the line of Niza.
Before laying the line along the edge of the side, I laugh at the bottom - the usual secret switcher was noted for reliability, but it was not without a congress in the cuvette ...
Now, in fact, it is possible to show what happened from the fact that it was hurried to cut the fabric (hunting in the forest forest):
The edge of the edge edge to some dense or double seam.
With inside:
Shoulder seams process by analogy, cutting out of the remains of silk strips in size. You still need to see coquettes on the shelves and the back of some dense seam. Or double.
Now the time to return the collar in place. It is necessary to make fitting and trim a bit of the neckline on the back and on the shelf, as it has decreased from the stitch.
Then you can distract a little and curb to cut a cloth on a sprinkler 3 here everything is already captured, it is already visible where you can cut. It should notice that satin crepts instantly without using auxiliary means (a brush is usually used).
Help. Now for business - on the sort of sleeves. Initially, you need to sew cuts.
Then, like all other details, rolling, handle cuts with a slap. OKAT led. To the sleeve sat down correctly, it is better to make a fitting (high point of OKAT (WTO) will now be shifted relative to the one that was on the shirt).
Sleeves sewed, admiring. I crush that the cuffs have managed not only to break up, but also cut off the loops. And the sleeves are short steel! Well, the second blouse is the same. Steaming the cuff. Sow in the sleeve a bit displeasing, I make a screens. The bottom is slightly charged. Seving the cuff (just like the collar). I convert it in half and fasten both edges with a button. After all, it is necessary to happen - the right amount of adorable metal buttons turned out to be in a cherished jar exactly as much as necessary :)
Sent more comfortably and sewing the glass. It turned out to be less on the calibration, and I had already generously touched the flop flush. It is good that there is another chopped beads of almost the same color, I use it for a coquette and sprinkle.
But the final result is my pressurka ready and looks like this:
And this is already a balobiness - a photo session in the interior:
Weekly in two I will sew a handbag of the same, come to see ...
Share - Eremchuk Irina.
A source