This is a very common problem when the slots are stepping under a screwdriver from a screw, screw or self-press.
This may happen for various reasons: incorrectly picked up a screwdriver, the effort was not correctly attached, and TP. As a result, it would seem that the situation is almost hopeless and will have to make a lot of effort to twist for example a screw with linked faces.
It is not always so difficult as it may seem. I will show a very simple way to turn off the finished screw. And for this you will not need absolutely no wisdom materials and tools.
Easy way to get out the linked screw
All you need is a small piece of rubber or rubberized material. Suitable: Medical harness, rubber from a bicycle or machine camera, rubber ball and TP.
In general, cut out a small rectangle from what is. We put on top to the jammed screw. Rejoice in a screwdriver and sneaks begin to unscrew.
Yes, it's so easy! The main thing is to send more pressure on the pressure on top of the self-tapping screw.
After several revolutions in the rubber band, I can printe a face and a screwdriver will start scrolling. To do this, put the gum on the new surface and continue to unscrew the screw further.
I did it with a harness and with a camera from a bike, folded twice. The result is excellent, everything dismisses without problems.
It was the easiest way to unscrew the linked screw without the use of drilling and other cunning devices. Also the fastest. So friends, take advice on arms.
Watch the video
If you do not quite understand how to act - watch the video.
A source