For the processing of open sections, the prey, the neck and allowance use oblique beyk. But depending on the convenience of work and the desired result, it is possible to sew the oblique paika.
How to sew oblique bay
1 way
Fold the oblique beyk and with the processed section of the product facial sides to each other.
Note or scalulate tailor pins.
Still by retreating from the edge of the cut 1-1.5 cm (transmission distance).
Configure the allowance to 0.7-1 cm.
If necessary, sign and oblique beyk. Its width must be twice the allowance. For example, the allowance of 0.7 cm, then the width of the beam - 1.5 cm, if 1 cm, then the width of the beams, respectively, 2 cm.
Squeeze the oblique boobs on the allowance.
Protecting the edge of the faucet wake the allowance.
If necessary, notice.
Remove the allowance together with the oblique baker on the outstanding side of the product and notify with a small "transition".
Build it to the edge on the sewing machine or suck the oblique paika manually by a secret seam.
This method is suitable for processing oblique, round and straight cuts.
2 way
Fold the oblique beak in half the invalid side inside.
Squeeze oblique beyk, slightly stretching it in length.
Snorge the fairy across the width.
Scoliate or notice a folded halice of the oblique bay to the front side of the processed cutting of the product.
Depending on the width of the bey, sharpening 0.5-0.7-1 cm from the edge.
Squeeze the bay on the allowance.
Unscrew the oblique place together with the allowance on the wrong side of the product. At the same time, the beaks must overlap the allowance of 2-3 mm.
Note with a small "transition".
Build it to the edge on the sewing machine or suck the oblique paika manually by a secret seam.
This is the fastest and easiest way.
3 way
With the help of the Portnovo pin, make oblique beyk. Or use the ready-made buoy.
Get ready to fold in half and start it.
At the same time, one side should be a little step towards another, about 1-2 mm.
Insert the processed section of the product into oblique beyk so that the narrower side of the beaks is from the front side of the product.
Note or scalulate tailor pins.
Lay the line with the front side of the product, exactly in the edge of oblique bey. For this operation, you can use a sewing foot along the edge.
This method is suitable for processing direct open sections.
A source