My turn came to tell about the cradle from the cast material, the other day I finished sharing it.
The idea to use these materials came long ago, all summer was going to do anything, as a result, like that dragonfly from Basni, all summer missed and only in November began to work. It is good that the competition was announced, even though the photographs did, otherwise I usually remember them when the product is already ready.
I remained after repairing several rapids of plastic pipes. Every time, going to the Saryachik, I looked in their direction where to adapt them, and here the boxes on the regiment cleaned up to the future spring, something hooked the lacquer ... And everything was sapped with it, these trimming were very successful: the pipe In the middle on the floor, it turned out to be two trimming, on the sides, covers, the plugs were fell to them, the picture immediately developed - yes it is a lock, almost in the finished form!
I brought these trimming home, I cleaned, connected together and became more different material to them, at secluded places hidden, collect. Here I came in handy and substrates for food products, for the summer there was a lot of them accumulated, trimming of foam ...
It turned out something remotely similar to the eastern castle. I demonstrate what happened in the end and represent a master class on the manufacture of a castle from different trash.
What served as the material:
Here they are, trimming pipes of different diameters, which formed the basis of the crafts.
- Pruning plastic pipes,
- 1-2 plastic bottles,
- Foam plastic and food substrates,
- glue, any, how can foam and plastic can be glued, I took Titan,
- Acrylic or oil paints,
- brown paint spray
- Plotley, better facade
- And the desire to make something.
Castle manufacture:
Baked together pipes, laying foam for stability, fixing scotch. When the glue is dry, tape did not shoot, in the intended version it will not be visible anyway.
He painted this construction of paint from the canister and took up the manufacture of decor.
Drew windows, doors, balcony on substrates for candy, cut out.
The bushes glued down from trimming, trees painted trees on the remnants of the ceiling tiles, the entrance was built from the foam.
Applied several layers of putty on all carved items.
Here I want to clarify that, in fact, the foam of water is not afraid of, to protect it with a spheolder only if the oil paints or the product will be covered with varnish, which can dissolve not protected foam.
In the spring of the castle will be covered with varnish, so the twin is applied, irregularities are treated with a skin.
I start gluing elements on the facade of the building: windows, arches, bushes, entrance elements, and so on.
It would not advise to glue glue gun, everything will disappear, it is better to use not afraid of frost and water glue.
After drying the adhesive, you can paint the elements of the building.
Initially, I wanted to leave them white, but I criticized me, I had to paint all the elements with acrylic.
At first, all the greens made a yellow and red, like autumn, but it turned out too bright, as a result of the tone, he muffled, and the greens became a dark green, so as not to stand out.
The opposite side did not become miserably, left as it is.
Latest strokes.
Fairy castle ready!
Now I sit and think that this castle should be cut out of the clear elephant or camel. Elephant, for some reason, you want to cut more. Maybe then add ...))
a source