Newspaper

Of course, MK on weaving baskets from newspapers on the Internet a huge amount. But questions still arise. Therefore, we turn to the present professional of the Physaly, which has filmed everything in good faith from beginning to end.

So MK of the Physaly with all the subtleties

Start

I cut the newspaper for 4 parts. But I use only extreme, where there is a pure unsophisticated strip. I do it to save paints, one layer of enamel is enough. And we wig so that this strip lay from above. The photo shows. Clear on a bamboo skeleton at an acute angle. The tip fix the adhesive with a pencil. Tubes when weaving make flat, skipping between fingers.

I cut off the top of three sides from the box, and the fourth leave, the lid will be attached to it. The box is painted in the color of the future casket - so that it does not shine through the weaving by another background.

At the bottom of the box, glue the odd number of tubes. In my case, 15+ another weaving tube. Clay- "Titan

Supercount.

In the process:

The tip of the tube, which was spicy, hide and stick over the previous one. And the vertical tubes cut the shorter and stick from the inside of the box.

And at the back I simply cut off the tube shorter and gluing to the box.

Next is the edging on the top edge of the box.

..... and at the bottom edge.

Then the box is painted. I used white PF-115 enamel with the addition of calves.

For the lid, the cardboard is cut into the size of a little more box itself a few millimeters. It cuts the foam rubber and the skin. Foamon is slightly smaller. And instead of the skin, you can use anything, any tissue, for example.

All three layers fasten along the edge of the stapler often-often. The lid decorate, as the fantasy tells, and stick it on the box. Ready. And inside can be placed with washing wallpaper or cloth.

Continued ...

As it is neither sad, but the previous box had to be thrown out. I did not fit the painted, the first layer of paint was not liked, the second layer was also, and the casket with three layers of paint had already looked rude and hard.

This time I wanted to make a casket completely wicker. I will stop in more detail on the lid.

The cardboard was glued to the cardboard close to each other, not leaving the gaps. Next, the short tubes inserted, the ends of which as weaving bent and lining the back.

On the edges glued the tubes.

The finished lid is attached to the box.

Added: The cover is glued to the glue "Titan"

The lack of such a cover: it is not held itself in the open position, collapses.

Beautiful PF-115 beige enamel.

Printed napkins on PVA. After drying, only them covered with acrylic aerosol varnish.

Next box ...

This time made the lid, separate from the box. On the edge of the lid glued with a braid woven from the tubes. Dyed enamel of PF- 115, mixing beige color with white.

Inside glued fabric former curtains.

Basket for needlework

Basket of splash on a cardboard box. The cover is also a cardboard, pasta-seashells glued on her. Painted copper aerosol paint.

Inside the cloth, glued it to the box along the edges of the titanium. The daughter holds the lid, and it slams :).

Box octagonal!

For a long time I got the idea to make a polygonal box, but there were no boxes of a suitable form. Then he took the usual box and cut off her angles.

Hurray, modeled the box of the form you need!

Weaving process. Not everywhere glued vertical tubes. I think so more interesting. The rest is everything as usual. The cover is not selected, but simply to the cardboard pasted the tubes.

Added.

And intra-wallpaper.

Crafts for needlework oval

I wanted to paint and stick the napkins, but the husband said it is better to leave so much, and so good. Well, that, even if it is for a variety.

I continue to experiment with the box form. I tried to make an oval shape.

Also cut corners from the box, not a touching bottom. The bottom was spinning separately. In the corners glued rounded cardboard. To do this, one side of the cardboard wetted with water, then the rolling pin was spinled. Dried cardboard holds a predetermined form.

The lid of the flell also, as shown here: http://stranamasterov.ru/node/80949, only two tubes. Inserted foam rubber to give the convexity with a lid.

The edge issued a pigtail. It remains inside to glue the wallpaper. Pictures then add.

And now round ...

This box is the smallest of all in diameter 15 cm, a height of 10 cm.

For the lid used a circle of cardboard, on the edge of which glued a pigtail. Then painted. Next, the insertion of the cardboard was glued onto it + the skin bonded by the stapler. Roses - out of leather.

So I made roses. Petals are cut and held for a few seconds above the candle, so that the edges be bent. Then, starting from the middle, they are going to glue.

Casket can be used for jewelry.

A source