There are many shipping methods of the zipper "zipper", I want to suggest to try one of them - not difficult in performance, but with an unusual order of operations.
Summeted with soap to the cutting line of the seam, in which there will be a zipper and tape details of the product.
Pour the line along the planted line the largest stitch.
This seam at the very end of work will need to be removed.
Sverbearing seam.
Fulfill one part of the lightning face with the front side, retreating with one millimeter from the seam.
Using a one-sided foot, make a line, retreating from the cloves of zipper by 2 millimeters.
Lightning to fasten and cross over the other side. To make pins on a width of 5-7 millimeters.
Magate the line, retreating from the fold of 1-2 millimeters.
Unscrew the lightning on the allowance and pinch the pins to the second side.
Make a line on the second side of the zipper, retreating from the teeth by 2 millimeters.
Turn over the part on the front side and led into the pins, squeezing the finishing line line.
Make a finishing line, capturing lightning.
Referring a knot from the front side.
Delete the first line.
Voila! Everything turned out beautifully and neatly!
Another clutch of lightning:
One end of the zipper impose face to face for the allowance of the product, pre-slept (here in the photo it is not uttered, since the product was sewn on the lining) and dangle, retreating from the edge of the zipper by 2 millimeters.
Remove the seam allowance on the product and lay the line on the product by 1-2 millimeter from the fold.
Also, stop and the second side of the zipper. In the photo under the zipper detail of the adjacent or plank.
And one more option. Here is the adjustment of lightning with the front side on the product.
So you need to stack the seam and running the allowance. If you need allowing you to spend or but knocked.
Then turn the item on the front side.
To impose zipper and pinch pin on top of the seam connection of parts.
Shot a zigzag zigzag or another finishing line.
A source