Throw her teeth with a regular pencil. The stylus will smear zipper, and it will easily open.
In 1893, the Zipper was patented. Today she is present on the clothes of all seasons and has become an integral part of many things of the wardrobe. When zipping "zipper", the elements of one edge are clinging for the elements of the other edge using the lock (slider).
Separate details of "zipper" are plastic or metal brackets or teeth, one end attached on the tissue strip.
It is often cases that in an inappropriate moment is broken. What can be done and how to repair "zipper" with your own hands, explains AIF.RU.
The first prototype of "Lightning" was developed by American Wheathcomb Leo Jadson. Patent from August 29, 1893.
How to fix "zipper"?
Zipper "Zipper" diverges
If the "zipper" diverges or does not fit at all when the runner is moving along it, then, most likely, the reason is that the slider is omitted. To fix the buckle, you need to hold the lightning lock - the slider - with the help of pliers. It is necessary to clamp from each edge of the runner, and not in the middle where the tongue is attached.
If you climb the halves of the slider too much, he will not move at all.
Plastic clashes can sometimes get torn off, reveal to themselves. To reproduce such a "zipper", it is necessary to unbuck it, moisten its teeth with a solution of rosin in alcohol and leave it two hours to dry.
The divergent metal fastener is "zipper" can be fixed, slightly hitting the hammer along the entire length of "zipper" from the external and inner side. And also slightly reduce the gap between the upper and lower parts of the castle.
Broken Runner
If the runner is broken on the bug, then it must be changed. To do this, it is necessary to remove the limiters with the "lightning" by moving their spikes with a sewn or thick needle. Then you need to remove the slider. The new castle must match the size of the old. The size can be found on the back of the castle. It can be numbers 3, 4, 5, 6, 7, 8, 10, which in millimeters indicate the width of the fasteners. After replacing the slider, you need to insert the limiters again.
Split teeth on "zipper"
If the teeth broke out on the "zipper", then it is not always possible to repair it. You can restore them with a thick fishing line. Only consolidate the fishing line so that its ends do not interfere with the runner.
If the teeth broke out on the metal "zipper", then the clasp can be repaired by inserting the teeth taken from the old "lightning", if they are suitable.
"Lightning" tight dismissed
In order for the "lightning" easier to unbutton, you need to lubricate the closed clasp with paraffin or soap. Also for this purpose you can use a soft pencil. It is enough to spend them on the bump several times.
"Lightning" spontaneously lowers
Sometimes the "lightning" fastener is spontaneously lowered. So that this does not happen, you need to sew up, to the edge of the tape "zipper" by a wrapping hook. I fasten the "zipper", you need to suspend the tongue of the lock on it.
A source