Great way to save on repair: make a "liquid wallpaper" with your own hands. Continued below
Excellent solution for uneven walls: we make economical "liquid wallpaper" with their own hands. You can use wool, cotton or syntheps as a filler. But we will learn to make wallpaper. Old newspapers, waste paper, unnecessary drafts are suitable.
You can put into the course of whole sheets, but it is better to cut them into a bed. Just make sure that the paper clips or remnants of glue were not lost among the paper. These components may damage the result.
We place the chopped paper in the bucket and fill with water. Water should be barely warm. If you want to cover the whole wall of the whole wall, then it is better to immediately prepare the desired volume so that then there is no difference noticeable.
A kilogram of cut paper will take about 5 liters. water. The mixture should simultane at least three hours. Then the paper will completely spill.
Now you need to thoroughly grind and mix trimming. You can make it a construction mixer. But a drill with a special nozzle is suitable.
Now add a kel. Choose a suitable shade. Two covers will be enough.
In the resulting mass you need to make gypsum. Approximately 40 spoons from under children's food. All thoroughly mix.
Add glue PVA. We will need 2 jars of 100 ml. The glue will help the particles of the mixture to grab each other. Yes, and on the wall such wallpaper will hold better.
And again I mix well. It turns out a thick inhomogeneous mass. It seems to resemble the usual putty.
Go to applying. You can use different tools. The best metallic spatula is suitable.
We apply small areas. Gradually add more and more new portions. The thickness of the layer must be at least 3 mm.
Let the wall dries at least a day. Then the finished version will look very cool.
A source