Materials: Plastic bottles (or laminate, transparent plates from folders with files and other), scissors, hole punch, hook, yarn, lining fabric, 3 locks, ribbons, beads, glue
1. From plastic bottles to cut 34 squares with a size of 6 * 6 cm and several strips for the handles and the decor of the top of the bag. Using the hole punch holes like in the picture and cut the corners. Whatever the strips were long, I combined a few short connects with the help of melting the ends above the candle, and you can simply glue with glue. For the handles, it is desirable to make the plates in two layers.
2. Squares to tie with 2 row of columns, and I knitted the strip as follows: 1 column, 3 columns with nakid and 1 more column. Through the holes in the finished strips to stretch the tape.
3. Square to sew. In the form of a bag, carve two sublocks (external and internal). Easy flowers.
4. Sew lateral seams. Top tie to several rows of columns
5. External lining sew. Clean the internal pockets and sew them to the inner lining.
6. Pocket-partition to make the length of the equal length of the bottom. In the photo, the correct length is marked with red lines.
7. Remove the bag on the wrong one, put on it an external lining that you need to manually sew the bottom of the bag and sides.
8. Connect both sublocks and sew the lightning. On the inner edges of the bag to sew handles.
9. From the lining fabric to make a ruffle
10. The lining to sew to the bag so that the edge of the bag is free. To the edge to sew the ruffle.
11. And this kind of finished bags from above
A source