According to the author. Probably, many have old furniture on the cottage, which already looks sad, but it seems like strong. I live such a wardrobe, which served for a long time and righteously many-many years. And in my childhood, his task was to protect bananas until they wish. Of course, I could not throw it out, but he did not fit into the interior of the new house. It was necessary to put on it. The room for which he was transformed, rather small, but bright, so I chose the decision on the color scheme!
To implement my plan, I needed basic knowledge of materials, a small experience, a little more than a week of time and materials:
1. Emery paper and loop machine.
2. Acrylic primer.
3. Putty wood.
4. The spatula is small.
5. Gray acrylic paint.
6. White acrylic paint.
7. Varnish.
8. Brushes.
9. Paper scotch.
10. Sponge and water.
1 Stage: Preparation
We disassemble the wardrobe and clean the entire surface with a skin and a train machine (my cabinet was separated by a veneer, which was already falling off, so I wooled all that was solid wood). Transitions that remained from a veneer to the tree, I brandly smoothed the loop. machine).
Next, we remove the old fittings, take out unnecessary locks and all the holes and irregularities we pass on the wood putty.
After we rush with paper scotching glass and mirror; The holes where there were locks, scoring a piece of wood and also well wipe everything.
Let the putty dry well, then cover the entire surface of the primer and let it dry well.
Once again we pass the whole surface.
Stage 2: Painting: Apply a layer of gray paint and let it dry well.
Once again we pass the whole surface.
Apply a layer of white paint. Attention! We do not give white paint well dry!
When a layer of white paint snacks a little, take a basin with water and a shopping sponge - we make a "washout" of white paint, for this rough side of the wet sponge, we pose a white paint layer in those places that will be shabby. How much, where and what loss will be, it decides for yourself. In my solution, the white paint layer washed well enough. In this way, you can achieve different effects.
After the "washing" we give well to dry and pass to the whole surface again, then cover our wardrobe varnish. I used the lacquer yacht, it is very durable and it was enough to cover with one layer.
Let me dry by lacquer, remove the scotch, put the new fittings!
Now you can say yourself - well done!
So began at the old buffet a new story!
Thanks for attention!
A source