Today I will tell you how to sew a shirt with a lace back. You can use purchased lace, buy a large lace napkin or to link it yourself.
To begin with, you will need a shirt of your size. I chose a raspberry shirt, because I had a piece of an old tablecloth painted in crimson color.
Then you need a bay suitable color, 2,5-3 cm wide (you can already if you use lace) approximately meter. I bought a h / b bay, but you can buy and satin if you like it more.
Threads, scissors, pins, needle, iron and sewing machine. Well, the ability to sew a little.
Spread the shirt on the working surface and put on top of the lace.
Then cut lace in the form of T-shirt
Cut the back of the T-shirts, retreating 2-3 cm from the seams.
Fold the place in half, turn it out - so it will be easier for you to handle the edges of it.
Cut the boobs on the armies and the neck, slightly stretching the place and gadgets lace.
Then take it out.
Purge the typewriter, retreating from the edge of 1-1.5 mm. Stretch the place a little.
Remove the mark and shifting the armies and the neck, giving them a slightly semicircular shape.
If necessary, adjust the lower part of the lace twice and take the machine. I used a piece of knitted tablecloth, so I have the edge of the tablecloth and I did not have the need to hem it.
Then fold in front of the T-shirts and the back of the lace together and scroll them with pins on the side seams and on the shoulders. Smealance the seams.
From the front side, flexing inside the seam towards the T-shirts, watches the zig zick with a maximum step width and a step length of approximately 2 mm.
Control from the inside and cut off the extra battery on the seam, which did not get under Zig zag.
Take shirt.
A source