The difficult task stood before us - to divide the already small space with the help of a partition.
The goal is to divide the room into two zones. Room for baby and bedroom for parents. At the moment, such a visual separation of the bedroom and children's for us is optimally due to the fact that the child is still very small and it does not need a full-fledged own space.
The need for partitions knew even before the start of repair. Initially, options were viewed with sliding doors without the lower guide, but the cost is too high, and the proposed door design depressed.
The question overlooking the partition was solved by the end of repair, but the mortgage under the stretch ceiling in the form of the bar was screwed in advance. We needed the partition: we needed:
Planing planed 20 * 96 * 300, needles 16pcs.
Universal screws, galvanized 6 * 45.
Sculpture.
Saw.
Fixtures for grinding.
White lacquer for wood on a water-based company "Lacra" and a brush.
The design was collected on the floor, the boards were screwed to the base and the top with the help of self-tapping. Next, the resulting design was shoved between the floor and the mortgage in the ceiling. According to the plan, it was to screw all this to the floor and the ceiling, but the height of the boards was calculated so well that the design rose reliably in the struts. But most likely, after completing the repair, we will fix the partition.
Here, in fact, the result
Construction Height - 265, Length 150
Total spent about 3000 p and 5 hours of time, of which 1 hour is to collect the design, and the rest of the time grinding and lacquer coating.
Luck was bought in LM, liked the varnish on the exhibition sample in the store. The resulting result disappointed. Varnish is not easy to apply evenly, we did not work out to achieve the desired result in the form of white boards with a light hint on the texture of the tree. To hide numerous implications and layers, we had to re-bulk the boards after applying varnish.