We will sew such slippers? Pattern and master class are present.
Done not difficult, anyone will cope!
Felt slippers are sewn from two layers of thick and soft 5 mm.
Using the template, cut the part and schedule from three sides.
Grab a string of 2 soles and the front part, as in the photo
And so to do from 3 sides
Then another ... Make sure the details are tightly adjacent to each other.
Then begin to sew. .. Connect the node at the end of the thread of a 20-inch length of the primary color and the thread of her needle for embroidery. Starting from paragraph 3, insert the needle between the two layers of the sole and pull it out at the top, about 3/8 inches from the outer edge. This will allow you to hide the node between the layer sole
To start sewing you need to put on the thimble. Take two stitches through all three layers at point 3 in order to secure this point of the sock.
By holding three layers together to sew all three pieces together with a small running line of the OO perimeter of the sock, about 3/8 inches from the edge, pulling out the residual stitches as you reach them.
When you reach the end of the length of the length, tie the nodules on the bottom side of the sole. Insert the needle through only the bottom layer and the output approximately ½ inches from the entry point, the end of the thread hide
then sew two layers of heel
.
