If there is an empty angle with a free approach in the room, you have the opportunity to get a compact corner cabinet to the entire height of the room.
It will take:
- Bruks wooden 5x5 cm or 7x7 cm;
- plasterboard;
- Plywood fat for shelves;
- a door;
- door hinges;
- fasteners for attaching bars to the wall - dowels;
- Fasteners for drywall - black screws, having a hidden hat and rare thread;
- Putchal for drywall;
- Paint or wallpapers.
How to make a frame for an angular cabinet
Wooden bars first need to prepare. To stabbing their surfaces is optional - plasterboard trim closes all irregularities, but to treat protective impregnation for wood (from moisture, bugs, etc.) is very desirable.
We make a scheme of a future design, taking into account all parts on paper.
We measure the surface of the angle, we put on the walls, the floor and the ceiling markup. At this stage, special attentiveness will be required, the miscalculations are fraught with damage of framework parts.
Fresh plasterboard sheets on the walls - they will perform the role of the rear walls of the cabinet. You can do without them if the angle has a practical finish - tile, decorative plaster, etc.
Cut bars on design elements.
We build a frame, referring to the scheme and using marking on the walls / ceiling of the angle.
We are wearing a frame of plasterboard - with an external and inner side. If the angular locker is small, you can make single walls - only from the outside.
Fresh on the walls inside the frame of the bars to support the shelves.
Color the inner surface of the cabinet. You can go painting before attaching holders for shelves.
Finishing of the corner cabinet made of plasterboard
Slip the seams between plasterboard parts. The putty is chosen by the gypsum, the packages usually indicate that a putty is intended for what basis. It will be necessary to buy two types - to fill the joints and to align the surfaces (large-part and finely dispersive). Although there are universal gypsum putty, which can be used in that, and in another case.
After drying the finishing (leveling) layer of putty, all surfaces are grinding sandpaper. We strive for the best result. Dust after this stage we remove a brush and a damp cloth.
Collect the wardrobe or hide with wallpaper.
Turn the door. If the cabinet is small, perhaps more rational to install the door-harmonic.
The costs of materials are minimal, the work is not complicated, and how much space for the storage of the necessary things appeared in the house!
