One of the best samples in the technique of Patchwork is a warm vest with beveled shelves, which are performed simultaneously with different patterns - "braids", pearl pattern and "checkers".
Dimensions S / M (M / L) L / XL
You will need
Melange yarn (100% wool; 50 g / 91 m) - 6 (7) 8 SERO-beige motels, 2 (2) 2 Mokes of dark gray, 1 (1) 1 solemn, 1 (1) 1 Motor brown; Spokes number 3.5 and 4; circular spokes number 3,5 80 cm long; 3 Buttons with a diameter of 22 mm.
Patterns and schemes
Rubber
Alternately 2 is broken., 2 persons.
Pattern "Shashing"
Knit according to the scheme.
Pattern "Spit"
Knit according to the scheme.
2 p. With a slope to the left
2 p. Peer together face with a slope to the left: 1 p. Remove the front, the next loop to penetrate the front and removed the loop to stretch through the closed.
Attention!
When performing grazing after a rubber band, knit the face loop over the wrong, 2 p. Slice together facial when it is the first of 2 persons. Loops and 2 p. Slice together face with the slope to the left, if it is the last of 2 persons. loops (then the accumulation will be practically imperceptible).
Pearl pattern
1st row (= ez. Row): 1 persons., * 1 izn., 1 persons. *, repeat from * to * to the end of the row.
2nd row: loops to stick in the drawing.
3rd row: 1 izn., * 1 persons., 1 izn. *, repeat from * to * to the end of the row.
4th row: loops to check in the drawing.
Repeat these 4 rows.
Knitting density
24 p. X 32 p. = 10 x 10 cm, connected with a pearl pattern on the spokes No. 4.
Attention!
If only one number is specified in the instructions, then it applies to all sizes.
Completing of the work
Back
On the spokes number 3,5, to dial a brown thread 130 (138) 146 p. And knit with a rubber band: alternately 2 is elevated., 2 persons. (1st row = ef. row). After making a brown thread 1 r., Change the thread on the gray-beige and then knit the thread of this color to the end of the gum. At an altitude of 4 cm knitting gum finish with an invalible side.
Go to the brown thread and the following persons. A number of lying face, evenly linguing the loop so that 105 (113) 121 p. To penetrate the next elevation on the spokes. A series of face brown thread and then knit until the end of the detail of the gray-beige thread.
Go to the knitting needles # 4, to plunge 1 persons. A series of facial gray-beige thread and continue working with a pearl pattern (see above). After 63 p. From the beginning of the pearl pattern, make a mark in the middle of the label and start forming a prugi. To do this, close at the beginning of each row 3, 2, 2, 1, 1, 1, 1, 1, 2, 1, 1, 1, 1, 1) 3, 2, 2, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 p. = on the spokes 85 (91) 97 p.
When the height of the tray from the label is approximately 24 (25) 26 cm, the average 27 p. And both sides are finished separately.
To round the neck, close from the inner edge at the beginning of each row of 3, 2 n.
At the same time, to close the shoulder from the outer edge at the beginning of each row to 8, 8, 8 (9, 9, 9) 10, 10, 10 loops.
Right shelf
On the spokes number 3,5, to dial a brown thread 75 (79) 83 p. And knit with a rubber, as described for the back, end the rows (= the front edge of the shelf) facial (= chrome. Loop). In all rows (1st row = elevated. Row) edge loops to lies face. Talking 1 p. Brown thread, go to the gray-beige thread and then knit the thread of this color to the end of the gum. At an altitude of 4 cm knitting gum finish with an invalible side.
Go to the brown thread and the following persons. A row to tie the facial, uniformly lifting the loop so that 60 (64) 68 p. To penetrate the next eve of on the spokes. A series of facial and go to the needles No. 4.
Work continue with gray, dark gray and gray-beige threads (when changing the color of the thread to twist on the involving side of the part). Slit 1st r. Facial: the first 21 p. (Krom. + 20 p.) Gray thread, the following 26 p. Dark gray thread and the remaining 13 (17) 21 p. Sero-beige thread.
Next, the loops of the patterns are distributed as follows: the gray-bearing thread knit with a pearl pattern, a dark gray thread - according to the scheme of the "checkerel" pattern, gray thread - according to the scheme of the "braid" pattern.
Attention!
In the 1st faces. Row to dial at the end of a row from the side seam of gray-beige thread 1 p.
Continue to dial 1 p. In each 4th p., The loops scored to include in the pearl pattern.
After 63 p. From the beginning of the pearl pattern (16 pp) on the edge of p.) Start forming the armor: for this, at the beginning of each row, close from the outer edge 3, 2, 2, 1, 1, 1 p. Having closed the last loop for rounding the armhole, start forming SCOS V -the cutout: To do this, at the beginning of each row to close 2 p.
Attention!
Through 3 p. After the last closure of the loops for the armor to continue to gain from the outside of 1 p. In each 4th r., as when knitting to the armor.
Closing for the bevel V-shaped cut 17 (16) 15 times 2 p., Continue to close 1 p.
When it remains 31 (34) 37 p. On the needle, start forming a shoulder joint: close from the outer edge 8 (9) 10 times 3 p., While at the same time continuing to close the hinges from the inner edge for the bevel of the V-shaped cut-out - another 7 times.
Left shelf
Knit, as the right shelf, but in the mirror image.
Assembly
Seam details on the front side by mattress and knitted seams = mattress - longitudinal edges of parts (= 1 r. X 1 r.), Knitted seam - edges with closed loops. Perform the shoulder seams (seam should not stretch).
Planks Pruraim
Drink along the edge of the armor on the spokes number 3,5 brown thread from the front side of the product is evenly loop (start and finish in areas with closed loops): 1 p. From each closed loop (if it is closed at 1 p., Dial by 1 additional loop between them), on direct sections of 1 p. From each row, skipping each 5-6th r. (The number of loops should be multiple 4 + 2 p.). Slit 1 is elevated. row and go to the gray-beige thread. Slit 1 persons. A number of facial and continue to work with a rubber band = alternately 2 out., 2 persons.
Attention!
In each individuals. Row to accommodate: 1 persons., 2 p. Slice together face with a slope to the left, knit until the last 3 p. on the needle, 2 p. Slit together face, 1 persons.
After completing 11 p. Serious beige thread, to penetrate the last row of brown thread and thread of the same loop closure.
Perform side seams, including bar sheets.
Planck fasteners
Knit on circular spokes # 3.5 (rows in direct and reverse directions) brown thread.
From the front side of the product to dial evenly with a loop uniformly on the edge (start and finish on areas with closed loops): 1 p. From each closed loop (if it is closed at 1 p., Dial 1 additional loop between them) and 42 p. along the edge of the neck of the backrest (the number of loops should be multiple 4).
Slit 1 is elevated. A number of facial and go to the gray-beige thread.
Slit 1 persons. A number of facial and continue to work with a rubber band = alternately 2 eznes., 2 persons. (+ 1 chrome. The loop at the beginning and end of the row, the chrome. The loop in all rows to lie face!)
Attention!
After the 4th r. Serious beige thread Perform 3 button holes: tortinate 6 p., 2 p. Slice together face with a slope to the left, make a double nakid, 2 p. Slit together facial, * to peck 8 p., 2 p. Slit together with a slope To the left, make a double nakid, 2 p. Slice together face *, repeat from * to * (Total run 3 times). In the following is. A row of double campacks and for the front, and for the rear wall.
After completing 11 p. Serious beige thread, to penetrate the last row of brown thread and thread of the same loop closure.
Stopping beveled edges shelves
At the edge of each shelf, score on the spokes No. 4 brown thread with the front side of the product evenly loop = 1 p. Of each 2nd r. and 1 is elevated. The row to tie the front, in the next row of the loop to close the thread of the same color (the strapping must be smooth - not stretch the edge, but also not to fix).
To the left shelf plank in the acc. Places to sew buttons.