Those who make in the house repair with their own hands could once encounter such a problem: the screw is tightly pulled to the surface, and the slot (the slot on the fastening product, which inserts the screwdriver) tightly fed. As a result, unscrewing such a screw is very and very problematic. Usually such a problem happens with edges under the crusader. To unscrew the jar of the passats is difficult and not always possible. But there is a small lifehak, as easily and without any particular problems unscrew the tightly attached to the surface of the screw with torn faces.
To do this, you will need an ordinary gum (or rubber gasket), which will roughly correspond to the screw of the screw.
It should be placed on the screw and using the tool to start unscrewed.
With a dismayer, this trick also works with a bang.
Be sure to remember this trick to further easily unscrew the screw with torn faces.