Several options how to make very durable glue at home

How to glue the details (surfaces) to glue, probably everyone. After all, on any tube glue, everything is written in detail. And now we will look at several options, how to make very durable glue at home. For many, such opportunities will be a real discovery.

First we repeat the general rules for gluing items:

1. Bled surfaces should be well cleaned from various contaminants, fat and old glue.

2. For a stronger bonding, the surface should be rough, it is possible to achieve this with a file or emery paper.

3. Why should the glue layer be thin? The thick layer of glue "creates" conditions for the occurrence of forces, "drunk" adhesive film. Consequently, with a more subtle layer, it turns out more durable gluing.

4. On the glue seam you need to make load, use the power of the hands or pull the harms.

So, how to correct the sole of your favorite slipper, or glue two halves of the cup, we know. But, because none of us plans to break something, tear off, and especially, at the "every case" does not hold universal glue at home. Or he, as always, ended in time.

How can I replace factory glue?

1. Unusual glue for linoleum, tile can be made of foam and acetone.

It is done very simple: peel the foam in a place that requires repair, and sprinkle it with acetone. As soon as the foam begins to melt, press the bonded surfaces.

** This unusual means is very convenient to put the sole. In the same way, pour foam in the hole, drop 10-15 acetone droplets, wait a bit and press.

2. Sharp glass and plastic products will help you ordinary garlic. It is only necessary to lubricate two surfaces with a cut garlic slice.

3. If the house has chalk and "liquid glass", then a refractory smear can be made. She will help you glue porcelain, as well as glass.

4. Wropped off tile? A mixture of dental powder and a conventional silicate adhesive (stationery, for gluing paper) will help correct the situation. The craftsmen say very durable glue.

5. Cut into small pieces of linoleum residues (without a tissue basis), put in the jar and pour acetone. After 10 hours you will have a resistant glue. If you add chalk 1: 1 in it, then get mastic.

6. If there is carpenter in the house, it can be done more waterproof, adding to a hot glue solution with olif (25 grams per 100 gr. Dry glue).

Take advantage of these tips if you have an extra piece of linoleum or foam.

In my house, from all of the above, there was only garlic and acetone, and the factory super-glue, bought once "just in case."