This embroidery looks charmingly, and even a beginner will cope with her. A step-by-step master class will help.
Even if you have never embroidered with ribbons, you will probably get this composition with a yellow tulip. In this master class - detailed explanations and photos showing every step. This picture is embroidered including ribbons made by your own hands. Ribbons made with their own hands are given when embroidered flowers alive, very beautiful result. But you can, of course, use and ready (here they are also used with homemade).
You will need:
- Fabric for the base;
- Family;
- Ribbons: self-made silk - wide yellow, wide green and green lobes, ready-made satin narrow - pink 1-2 shades;
- Moulin or other threads for embroidery 2-3 shades of green color for embroidery stems;
- Embroidery needle with ribbons (big, pointed, with a long non-eclipse);
- Embroidery needle Moulin;
- scissors.
STEP 1
Before work, you can make a sketch - on paper to check with it, or outline the disappearing marker on the fabric. And you can improvise and work without a sketch.
Film fabric into the hoop. First you confuse tulip. To ingue in the needle a yellow ribbon. If the tape is wide, as in our case, its end can not be fixed by the knot, but it is possible to fix it. Support the nodule or end of the tape (about 1-2 cm) from the inside and output the needle with a tape on the fabric face. There will be a bottom of bud. Determine the size of the flower and where you plan it with the top, output the needle with a tape on the wrong one. Rentally, but do not tighten too much, let it remain a small volume.
Similarly, make a number of second petal. Correct the tape on the petals to lay as you like.
Making the third petal. In order for the flower to look more comprehensive and more, make the third petal a little longer than the first two. Start it slightly below the first and finish above it. Plus - Leave the ribbon a bit more comfortable.
If you wish, you can make the fourth petal, but also a tulip in three petals from a wide ribbon looks good!
Step 2.
Muline take out a few stems, for example, three, as in our example. One of them let leave from the tulip flower, and the rest later complement other colors.
Step 3.
Will with green ribbons leaves. Each sheet embroidered like this. Display the needle with a ribbon on the front side. Determine the desired length of the leaf, straighten the tape on the fabric and pierce the needle fabric and tape so that the needle enters around the middle of the tape (see photo above). Stretch the needle down neatly and slowly so that the silk homemade ribbons are not cling.
Tighten the tape, but do not tighten the leaflet at the top. Make as many leaves how much you want.
Step 4.
Complement composition with several small pink color-buton colors. They embroider them with a narrow ribbon, at its end it is better to make a nodule and leave it with an inside.
Take the needle with a ribbon on the face and make the puncture down next to the first bunch. Tighten the tape, but not very tight so that the face remained a small volumetric bouton. Buds can be made round or slightly elongated.
Add them as much as you want. At the wrongness, fasten the narrow tape, which makes it a needle in the tail in front of the knot, or in the wrong stitches of the thread.
Ready.
