Practice shows that, despite the availability of combines, blenders and other devices for grinding products, many hostesses and today continue to use the most common grater. Accessories are really very comfortable if it were not for one "but".
In the process of cooking, I do not want to spend time to clean the device, and after everything is ready, you have to spend a lot of time to remove the frying dirt. Many try to immediately dunk the product in warm water so that it is easier to wash the surface, but it does not save it from clogging tiny cracks. After a few weeks, the material from this starts to darken, the accessory does not cope with his tasks anymore.
Recommendations for processing grater immediately after use
Ideally, the processing of the tool should be carried out according to a special scheme, immediately, as the free time will appear. Manipulation consists of the following steps:
- First we prepare everything you need: lemon or raw potato tuber, dishwashing liquid, unnecessary toothbrush, nylon brush.
- We need to hold the grater for a couple of minutes in a container with a warm water solution and a dishwashing agent.
- We remove the grater and wipe the potato or lemon slice on all sides.
Tip: If you lubricate it with a slight amount of butter before using the grater, then the food pieces will not fall on the metal, and even after an hour they wash without any difficulties.
- Wash the nylon brush and drip several drops of dishwashes. Such a tool needs to wash the product from all sides, working exclusively along the location of the holes.
- If the food pieces are still stuck somewhere, clean them with a wet toothbrush.
- Carefully rinse the product, wet and exhibit dried. It is possible to remove the device into the closet only after it is completely dry.
The approach is rather troublesome, but effective. When applied, the surface of the grater will remain not only attractive for a long time, but also functional. And food will not acquire unnecessary notes and aromas that have passed from once processed products.
How to wash the grater from dried particles?
If all the terms came out and pieces of products tightly sealed the grater, it is not necessary to rub it with a metal sponge, knife or other dubious objects. It is better to use one very simple approach that will help to quickly restore and update even fine threads.
Considering the specifics of the method, it can only be used for grads from metal without any inserts.
- We will need: dirty grab, deep plate and microwave. Additionally, we prepare the detergent and soft sponge.
- In a plate, we pour water, we put on the plate so that the most contaminated surfaces are at the top and bottom.
- We put all this design in the microwave and run no less than a quarter of an hour. No need to be afraid that the product is melted, the device is simply not enough for this power.
- After the time is released, remove the product. It remains only to wash under running water using a soft detergent and sponge.
- If necessary, repeat the procedure until all dirt comes from the surface of the device.
Of course, you should not abuse the last method. High temperatures, and in combination with moisture can adversely affect the quality of the metal, accelerate the process of its decomposition or the appearance of corrosion. It is better to clean the product regularly, to dry and store. By the way, in the dishwasher, the graters do not pass the necessary processing, it is better to engage in their cleaning manually.