So I wanted something unique, solar and fresh, like sea breeze!
To you too? Then we make the earrings "Paisley" from wire, epoxy resin and pearl dyes!
- We choose the motive. I wanted to make "Indian cucumbers." Print a picture that will serve me by a template.
- You can, of course, draw it and by hand.
- I cut off two identical (about 20 cm.) Slush aluminum wire with a diameter of 1.5 mm. Aluminum - because light, soft and plump. This is exactly what needs now.
- If there is no aluminum, you can use copper, copper with silver.
- I specify the main size of the element with a row jar suitable on the diameter.
- I give the wire the desired shape, checking on the template.
- It turned out that such, almost the same pretzels.
- On a piece of boards pull a wide adhesive sticky side up.
- I lay the workpiece on the sticky side of the Scotch and check that the wire is very well stuck to the film.
- I decided to complicate the pattern by adding small rondeki Daisy. They, too, wonderfully stuck to Scotch and will remain in their places.
- In principle, filling and decor can be anyhow, I thought about Filigners.
- Once again before the pouring of the resin, we check that the wire will adhere to the scotch.
- If not, then the resin will penetrate out.
- Gently, not in a hurry, pour epoxy with a thin layer.
- Compound used PEO-510KE-20/0.
- The mixed resin is better to give a few hours to stand out, all bubbles, which were formed during mixing, the resin thickens and will not spread so much. Mixed compound can be put on a water bath (in a bowl with hot water), so degassing will pass faster
- For the product to be even more attractive, I decided to stick rhinestones on the rhondel.
- We use for this the same epoxy.
- The billet is flooded and dries. This stage according to the instructions for epoxy resin.
- Do not forget to cover the elements with a cap from dust!
- For the next day after drying, I noticed that my billets are muddy milk.
- This manifested itself with a glue from Scotch (right).
- Not scary, now I will fix everything (left).
- At the bottom of the billet not yet taken from the tape, the above is already brushed from glue residues, a completely transparent and clean element.
- In order to remove the remnants of the glue, you need to be saved with cotton sticks and solvent. I have this White spirit.
- Boldly clean, it won't hurt a resin.
- Then wipe dry.
- For an additional decor and add effects and color, we use pearl dyes by adding them to a mixed compound.
- They are not better suitable for the image of Indian cucumbers!
- Apply a drop of a green compound. Give the form.
- Give the dye the shape of a drop, use the toothpick - it is convenient.
- Even if it turns out not entirely symmetrically and equally, do not worry.
- Handwork and author's touches are valued above!
- Top view of pearl rope with blue flash. You can create patterns using different patterns of dyes.
- We give elements to dry. Do not forget to cover from dust.
- Compound with dye polymerized.
- It turned out not bad.
- Now you can decide what we want to make from these elements.
- You can chop holes and there will be a connector!
- So the element looks like a lumen. Clean, transparent.
- The color turned out to be sky, very much!
I decided that there will be earrings!
Added Schwenza, and ready!
And bonus! :)
Epoxy remained, of course, sorry to throw away.
Were under hand broken Schwenza. I bit off the contact part from them, poured with colored compounds.
It turned out flowers with pearl enamel!
It will now have a bracelet with beautiful pendants.
In general, "enhalation" on this principle you can have very many things :)
I hope this simple lesson will be useful to novice needlewomen and give new thoughts already experienced masters.