Sinel is a new fluffy fabric type resulting from stitching several layers of fabric with parallel lines on the sewing machine and the subsequent cutting of the upper layers between the lines.
This technique is well used in sewing jackets, cardigans, vests, bags, pillows, covered and other things. It is not necessary to "cake" all the product at all, you can limit the collar trim, cuffs, coquettes and other things.
For this technique it is better to use lightweight fine natural fabrics such as silk, viscose and cotton. A synthetic tissue can be used as a lower base layer.
Fabrics are used as monophonic and pattern. Fabys with a large or abstract pattern are very advantageous.
Unusually and beautifully looks such a fabric in sewing clothes. A completely stunning effect is obtained if the top layer uses Pavlovoposad's scarves.
The choice of color of the fabric depends on your preferences, as well as from the planned end result. The type of finished tissue will depend on the sequence of overlaying different colors of the fabric on each other.
Master class: how to sew a scarf in Sinel technique from Linda Richards
Scarves are one of the most popular accessories of women's wardrobe. They always look feminine and elegant.
Linda Richards sewed two-sided scarves in Sinel technique.
For sewing, we will need: three types of fabrics suitable for color and sewing machine.
From the tissues, we cut three scarf blanks by the length of the length and widths.
We fold them together and flash along the entire length from one edge to another.
After all the fabrics were sewn, cut the scissors between the stitched lines from both sides. Be careful not to cut the middle layer.
Then we will do a fringe. To do this, we draw, and then we flash the horizontal line by retreating at the desired distance from the end of the scarf.
The horizontal band will cut the fringe. The scarf is ready for washing in a washing machine, and then to dry.
And here is the result - soft fluffy scarf.
Alena Ahmadulina first introduced his collection for the Christmas holidays. As usual, the "fabulous", Lucbuca Alena Akhmadullina Resort 2016 is dedicated to Sadko's fairy tale. And a few things in the jeans cinema technique were perfectly fit, I propose to consider them better:
We sew a skirt on the scythe in the Sinel technique
Master class from Eherechuk Irina.
The skirt turned out to be double - you can wear in winter, drawing extra energy from the bright paints of the fabric stuffed pattern.
For a skirt, I used two types of flax - one dense altooth, the other thin with a printed bright flower pattern. To confuse the figure intensity, it was decided to use Sinel technique - then you mean when we cut the top layer between the lines, opening the lower layer of the tissue. With proper flower combination, it should be beautiful. Cream-pink flax How it is impossible to get a colorful pattern on an intense burgundy background. Again, my favorite cut in oblique, as if created for a tandem with Sinel appliances.
Nothing special for sewing such a skirt is not required - only a standard set of tools:
scissors;
needles;
The paw is ordinary and for zipper;
Threads in tissue tissue;
English pins for rocking details;
Portnovo chalk.
It is not difficult to carve an oblique skirt. As a basis is taken by half and cuts off on the sides, depending on the width desired, but not less than the volume of the thighs (just less, only if the figure is impeccable).
On the fabric it looks like this: I add two canvas from the colored and monophonic flax face to face, sharpening the side cuts and turning out. Ironing seams, trying not to stretch the fabric once again. Thus, the sections of the side seams do not need to coach.
Now I'm smoking the pins. And I make a markup (tailor-shallow) from the waist line to the bottom, repeating the shape of the skirt trapezion. Location on marking, trying not to pull the fabric.
View from the inside:
The fabric still stretched, so I had to fasten the molding.
Cutting the tissue between the seams and threw it into the washing machine (gentle mode), after which the car was becoming such adorable.
Important: strips that are adjacent to the edges is better to cut after the side stages
The top of the skirt (from the waist to the thigh) did not cut.
Total side seams. The seam, in which there will be zipper, has become the widest line on the length of the zipper, the seams of irrigated.
With the inside, the zipper attached to the place of contraction, combining the central part of it with a seam that connects the shelf and the back. Pinch. Noted. Pins took out. Stopped using a special foot.
Where the slider has thickening, plumming the fastening seam.
I open a little zipper so that the runner does not interfere with the edge.
The following photos are visible to admitted flaws:
1. One shelf was cut for a long time almost to the waist, without thinking that this part would be exposed to larger friction. True, I have an excuse: when I cried the skirt, and did not think that it would be a winter version in a tandem with a jacket.
2. Hurried cut strips adjacent to side cuts - now you need to pave an additional fixing line.
The top edge of the skirt first did not plan to process. But due to the extortes, you need to process, otherwise it is not Comilfo.
Skirt Upper Edge
1. I expect a strip equal to the length of the waist + 5 cm, and about 6 cm wide. Bending 1.3 cm, I pull one edge and the other than the other. The root edge is glued to the glue cob, making small pieces in the scene of the bend through small gaps.
2. Folding the wrapper face to face with the waist line, I'm smoking, despaling, compassionate from the edge of 0.5-0.6 cm (the width of the paw from the edge).
3. The edges of the hopper envelope side seams with lightning.
4.5.6. Overlooking the wrapper, enveling the line of the waist, I pierce, despite, rejuvenating the seam "in the groove" (if vision allows).
If you sew in pin (like me), then in front of the needle they need to be removed: besides the fact that you can get a machine needle in the pin, in the place where the pin of the knocked, the machine can do stitches (photo 7).
Processed with a hint, pasted. Ready.
Well, perhaps, that's all. I do not need to iron this skirt. All the cuttings and side seams were processed in the sewing process, so you can wear, pre-pick it up to it.
