Stylish lamp do it yourself: master class

Materials;

Basket-Caspo

* Rope. On this project, the large size of the sisala rope and the twine, which I bought on the coil. You can use any color, size or rope.

* Scissors

* Hot glue gun

* 3 or 4 hook, screws {large enough to accommodate the wire}

* Optional: Very thin crystal wired garland

* Patience. {This time-consuming project}

Note: You can choose any type of rope in weaving techniques that you like. Also pay attention: to paint existing copper plates, old chandelier

* Apply the basket to the ceiling and place where the hook will hang. If you use 3 hooks, create a triangle shape for balance

b

Drill holes and secure the hooks.

* He should look like this .... Make sure it hangs in parallel to the ceiling

* Start weaving with thick sisala rope

* Continue to weave until you are pleased

* Connect them together, everything is tight.

*, You can proper all, you can half or like here, create "Zig-Zag", the rope should not move. Weaving over and under the place will keep it in place.

* Now the thin twine {coil)

* Cut the piece of about 3 meters in length ... And begin to swell the rods, as in the photo, beautiful and tight

* Create X node {view as in Fig. 8 knots} at the heart of each of them, and if you have enough twine, continue to go until you reach the end ...

* And hot glue gun secure {but disguise any remnants of glue}

* With crystals ...

That's all. The chandelier is made ready!