A fairly common problem of Russian female figures in combination with European clothing is tesne in breasts with perfectly suitable size and beans. Regret to lay a shirt or blouse back to the store shelf only because of the fact that this clothing "does not leave the exposure of imagination", while the thing is just turning to you?
The second problem, but now already familiar lush female Russian figures are close cuffs. Let's see how easily solve both problems with the most basic sewing skills. In addition, to divide with these issues elegant and trend.
The first thing you can do is cut off buttons with a cuff. Do it gently so as not to damage the fabric. It is convenient to use the universal plowing (in the picture).
Then, the same buttons are then much closer to the edge of the cuff, which will ensure your hands not as an example more freedom.
Then cut the back of the blouses exactly in the middle, vertically in a straight line with the bottom and up to the transverse seam above.
Generate both formed untreated edges inside about 1.3 cm each. Lay them in this position, but do not sew it.
Find a pretty lace under the color of the blouse fabric. If you do not plan to wear this blouse only by clubs, the lace is worth choosing a dense with a minimum of translucent areas. There will be an ordinary fabric, but well-combined with a blouse in color.
If the lace is taken from the old blouse or shirt, it is worth using an existing treated edge and impose it from the outflow of the overheated blouse on any of the edges of the cut.
So, put the lace face up, on it (also face up) the cut flashes. If the lace already has one processed edge, align it with one of the gallant edges of the cut and scalulate the pins. Depending on how much centimeters you want to increase the width of the blouse in the chest area, discover the incision (you will have a high triangle) on the required width above, and then scalp and the second edge of the cut and lace under it. At this stage, you should try on the blouse and see if you chose the widest width.
On the typewriter with a direct seam of lace to the fabric on both sides. Try close to the edge of the fabric.
Turn the blouse with ancient lace offar up, cut the extra lace from the second side of the cut, leaving the allowance of 1.3 cm. This edge can either handle a seam zigzag, or adjust and sew to the lace yourself (not to the blouse so that the front side is not It turned out double seam on one side of the cut).
Now you have not only suitable for the size of the bust of the blouse, but also a fashionable original thing with a beautiful back. In the chest before and after:
If you want to stop the blouse, simply mark the waist level at the back of the pin, and then find a decorative short jumper or buckle and enter to the right and left at the waist level of the edge of the cut immediately behind the lace. So the incision will again converge in the back on the waist and thus pull the blouse. Long jumper you can control the degree of flange of the blouse.
Remember that if you used lace, wearing this blouse. Now you can now only with a bra similar lace color.
Three ideas how to expand the dress, cloak or sweater.