Production features
Inventory to have a long service life, it is manufactured in accordance with certain requirements:
- The tray must have sufficient strength in order to withstand a large load.
- So that the shovel easily slides in the snow, the form of the bucket is attached to the ribbed surface.
- The rubberized handle at the end of the handle will help avoid slipping in their hands.
- The length of the shovel for the shovel should be approached by the growth of a person, it usually happens 1.5-1.8 m. The optimal length is to the shoulders of a man who is going to use it.
- Length and width of the tray depend on the person's complex. For the average person, a scoop with dimensions 50x50 cm is suitable.
During design design, various modifications should be avoided, for example, a folding handle. Despite the convenience and practicality, its service life will be short.
Shovel for snow with his own hands
The market now provides an extensive range of various inventory for household needs. Production materials may be different, each of which has its advantages and minuses. Before you make a shovel for snow with your own hands, you need to decide what you are going to make a tool.Wooden shovel for snow
The basis for the tool can be a sheet of plywood. The size of the scoop is selected individually, and the thickness must be 4-5 mm. Also need a stalk. It is possible to buy it ready or made from a bar with a cross section of 5 cm, having shed a planer.
Prepare the following tools:
- emery skar;
- Screwdriver and drill;
- Lobzik;
- self-tapping screw;
- nails;
- several metal strips;
- primer.
Such work may take only a few hours, which depends on your skill.
You can start making shovels for cleaning snow from plywood:
- From the plywood sheet, cut the square. She can give various forms, including crescent.
- Make a plywood holder. It must be cut along so that its width is 7-8 cm. The edges of the workpiece to make molds to give it an arc form.
- If you do not use the finished cutter, then process the bar using a planer, and then emery paper. In order not to damage your hands when working, make a handle need smooth.
- In the middle of the workpiece to secure a scoop, make a spideller coinciding with a cutting diameter. It will consolidate the handle at an angle.
- Connect the attachment of the shovel and scoop using nails. It is important to ensure that the compound is hermetically. There should be no cracks in the product, otherwise moisture will penetrate inside the material and spoil it.
- Insert the cuttings into the hole. The bottom is screwed to the base with the help of screws. It is better to drill holes in advance for them, since plywood can crack from twisting.
- To enhance the shovel, use a strip of aluminum or the other metal 10 cm. It is bent along in half and put on the edge of plywood. Touch the hammer and consolidate the entire design of nails.
- Another strip should be used to strengthen the connection of the scoop and the board. And the third strip is the shake of the handle and the base.
To extend the service life of the shovel made by your own hands, the finished product is treated with the primer. It will protect the inventory from fungus, rotting wood and unfavorable environmental conditions.
Metal shovel for snow
Before making shovels for snow cleaning, prepare the necessary tools.
For a scoop, it is recommended to use galvanized metal and stainless steel, the thickness of which should not be less than 0.7 mm.
You will need several metal stripes, screws, bolts, board and stalks. Tools are as follows:
- screwdriver;
- drill;
- Scissors for metal or Bulgarian;
- spanners;
- plane;
- sandpaper.
Then proceed to work:
- It should be started with the basics of the inventory, because it sets the width of the scoop and the length of the details for the bond. To do this, use the prepared board by making one side of the semicircular. Top to make recesses for strips from metal. In the center of the base, drill an inclined hole for a cutter.
- From the sheet of tin, cut the 40x40 cm web, edges to handle the sandpaper. Drill holes on one side. Metallic strip, cross the scoop from the other side where the holes are drilled. Generate edges per distance equal to the recess. Drill holes exactly along the holes of the scoop.
- The cuttings for the shovel can be made with their own hands. To do this, remove the chamfer from four sides, then make it round and smooth with a planer. The end of the handle is spool under the desired angle and drill the hole for fastening the bolt.
- On the basis, put the prepared material for the bucket and make the abuser. Secure it with screws and strips on both sides.
- Next, the instrument is assembling. Insert the cuttings into the hole. In the place where he comes into contact with the scoop, secure them with a bolt. In the edge of the base, drill the hole and secure the bolt with it with a stalk for greater reliability.
If you want to extend the service life of the homemade inventory, then parts of the wood open lacquer or paint. Also use special substances to prevent the appearance of fungus.
Plastic shovel for snow
Bend a little plastic to check it on strength. If cracks and damage appear - it means that the material is low quality, and it is not worth buying a bucket.
You can make a shovel for snow with your own hands using a barrel or a canister from plastics, the thickness of the walls of which is 6-8 mm.
For this you need:
- From the canister or barrels cut a square that will serve as a bucket.
- In the center of the base, fasten the handle using screws and bolts.
- The connection site can also be strengthened with metal stripes or rivets.
Embodiments of homemade shovel for snow cleaning there are many. They can be made of their primary materials as soon as possible. With proper operation, they will serve not one winter. The rest of the year is better to keep in a warm and dry place.
Source ➝