Sharpening a knife is a whole art. Each owner or hostess sooner or later faces the need to sharpen the kitchen knife. This procedure can take away a lot of time, and all because the sharpening is performed at all correctly, and most importantly - not under the angle that should be.
Materials and tools
In order to make the adaptation control of sharpening an angle, you will need some things. First of all, it is necessary to get a segment of a plastic decorative corner of 20x20. Also need transport, superchalters, scissors, mounting knife and marker. Finally, 2 magnets drops from headphones will be needed.
The working process
The created tool will look like a small check box. The accessory should not be directly in contact with the grinding stone. That is why there is enough plastic for its manufacture. Before making an accurate pattern, markup should be performed. To do this, we take a segment of a 40-50 mm corner and retreat on the left on the template necessary 10-15 mm. After that, it remains to form the right angle of future sharpening. For each type of blade, this angle is yours. For example, for a kitchen knife - this is 25-30 degrees.
With the help of scissors or mounting knives, we cut out our template. Now, take two types of magnets and glue them to the design of the corner with the help of a superclay. Here, in fact, all.
Instructions for use
The created corner is fixed on the knife blade with the help of magnets near the foot. The essence is to choose the right angle, applying a knife with a "flag" to the lying grinding stone. To judge the correctness of the sharpening angle can be on the incident shadow. Such a guideline will help keep the knife when sharpening correctly. The most important thing here is that this accessory will significantly reduce the tool sharpening time.