In order to make a simple tube with drawers, you will need:
Materials:
- 2 longitudinal and 8 transverse bars for the manufacture of the frame;
- two plywood sheets for side details of the couch;
- a large sheet of plywood or glued furniture shield for the base of the couch;
- 5 parts of plywood for the manufacture of each box;
- Wooden rails for the manufacture of facade of the cabinets, as well as furniture facades of drawers;
- 3 retractable systems for drawers;
- furniture screws or wood screws;
- nails for plywood;
- furniture paint;
- Furniture varnish and glue for working with wood at will.
Instruments:
- manual circular or electric bison;
- electric drill;
- screwdriver with a set of bits;
- grinding;
- Miter saw;
- construction roulette;
- hammer or pneumatic nail industry;
- pencil and square;
- Paint roller for painting, brushes.
Step One: Decide with sizes and prepare drawing
The dimensions of such structures are individual and depend primarily from its purpose. Decide with the sizes in your case and, using the presented drawings, prepare your own drawing with detailed details.
The skeleton of the couches is made of bars and withstand the weight of three adults. You can use b / y lumber, pre-maintained and passing wood.
For the manufacture of facades from natural wood, any trimming of the equal cross section will be suitable.
The cabinet of the cabinet is made of plywood. For the main part of the seating, use the fanner of a suitable thickness if you plan a larger load on the end. Plywood must have a pleasant smell of fresh wood, which indicates the high quality of adhesive components used in the process of its manufacture.
Select the paint of your column of interest. It should have a high resistance to abrasion, which usually possess furniture paints. If you plan to keep painting work in a residential room, choose water-based paints. They are practically unpleasant odor and are the least toxic.
Step Three: Assembling Frame Cabs
Follow the bar and saw it into separate details. In order for the res to the maximum smooth, use the permeaker saw. This will greatly facilitate all the further work and the assembly process.
Dock parts on a flat surface and check all sizes. Mount the attachment sites and drill holes for screws. Collect the framework using a screwdriver and clamps for the convenience of fixing the design. Use also a square. It will provide a straight angle when assembling the frame.
Assemble there are two framework details. Next, they will be attached between plywood shields. Split Phaneru, using a manual circular or an electrolovka. The author uses a guide to ensure smooth cut.
Secure the side details of the couch with self-tales. Frame ready!
Marking the plywood or suitable boards on the width for the manufacture of drawers. Split the material according to the drawings, following the cutting to be as smooth as possible. Collect boxes using self-tapping screws and nails for extra fixation.
Step Fifth: Setting Retractable Boxes
The elementary design of the couch will allow you to install the system for drawers simply and quickly. First, determine the place of fixation of the accessories on the boxes and the end. Make a pencil fastening location to do nothing. You can make marking with lines in order to control the angle of fixing the guides.
Using conventional screws, secure accessories on the walls of the couch and on the sides of the boxes. To observe the same indent from below, the author picked up a suitable height of a lining rail.
Place each box in your cell and make sure that it easily closes and opens.
The facade of the cabinet is conceived by the author of a natural tree. It is needed in order to hide the joints of the parts and make the front of the cabinets more attractive.
Separate the rails on the segment of the required length and do the diagonal holes for connecting parts to each other. Collect the facade on self-drawing. In order to facilitate the assembly process, the author uses clamps, securely fixing the design on the spot. This will allow all work alone.
Collect the perimeter of the facade and try it. Right on the spot, check where the transverse rails will be attached. Lock them with self-draws.
On the same principle, make the facades of the boxes as shown in the photo. Synod them on the overall design and make sure that you left the gap between the two facades a couple of millimeters.
Step seventh: assembly of the couch and painting
Facades are ready, it remains to fasten them and you can go to the next step. Use nails for fastening. They are less noticeable and quite enough to fix decorative elements that are facades.
Comerate from the details of the couch, preparing the surface to painting. It should be smooth and clean. A paint roller apply the first layer of paint and let him dry completely. Apply paint again and leave until complete drying. Some of the modern high-quality furniture paints do not require lacquer fixation. This is usually established by an experimental way.
However, for reliability, one or two layers of resistant furniture varnish can be applied. Try to choose paint and varnish one manufacturer. So you can be confident that they are fully compatible.
Tumba is ready! It remains only to install it in place. Subsequently, the author modernized it and turned into an entrance to the hallway to the hanger.
A source