Dumb decor do it yourself. Turn from Cinderella to the princess!

This is how you can embroider two shoulders in a dress or blouse, a blouse.

This is an embroidery shoulder and single sleeves by sequins.

Gold rose and leaf

This embroidery shows the effect of a shade achieved by using flat sparkles and sequins-cups. The motive with a rose is well embroidered on a blouse or dress on one of the sides. Scheme for embroidery colors and leaves, color gamut Use the one that suits you more.

Methods of embroidery beads and sequins

1. Operation "Bridge"

Besser Czech granular, smooth, round, with a mirrored surface from inside a thread - Fastening cotton 45, folded four-solid needle - special super-thin

Fishing: Game - Four Bissserinki - Skidet. You can begin the next bridge from the last sequin

Send the foundations of "bridge" - sequins almost near or for the length of the bridge. The edges of the bridges (when the row ends - I start in a checker order and you need to sew one sequin, fixing it with one bissorinka - "Pumpchik"

2. Popponchik

Needle pierced the fabric, hangs a sequer, bissorink, we put the sequins in the same hole and through the fabric

3. Pumpchik through the edge

Needle pierced the fabric, hangs a sequer, bissorink, we put the sequins in the same hole and through the fabric

4. Bird foot

Send a sequence through the center to the edges in three points. This embroidery can be done in one thread. The "bird paw" is very good to use in those places where it is necessary that the material is drawn or on the leaf elastic, so each driver is strongly attached separately. Embroidery is obtained smooth. On the visible part of the thread you can skip beserins.

It is more convenient to piercing fabric from the edge of sequins inside into the center of the hole

5. Fish Schee

We sew ahead of the needle a little more than the edge of the sequins, and the finished stitch to the very edge of the sequence, after which we ride the following sequin. It is suitable for the bummer.

6. Chain

We recruit several beserin on the needle and put it on the length of the chain

7. Rose

We recruit several sequins on the needle and put it on the length of the chain.

8. Beer and stones through the edge

9. The sewing of the ready-made tape sequins or beser

We first type the long thread of the beser, and then in the drawing we sew a chain after each bisseriking by another thread

Feston with a pattern

The curl is made by the seam "Forward needle" (a) with sequins of cups of 5 mm and glass with round holes of size 2. The flower stalks are embroidered with a "oblique stitch" using a glass chain with square holes 1. For a single stem, beads with round holes size 10; the same beads along with sequins-cups

5 mm made outlets; Side twigs are embroidered with sequins-cups of 6 mm and pearls of 3 mm.

This festone can be placed on the edge of the evening jacket, just below the waist of the evening dress, as well as on the pic. Come up with your options. For example, embroidery in golden colors on a wedding dress or a multicolored pattern for a black dress.

Shoulder pattern

The contours are made with a "forward needle" seam, and to fill the space inside the shapes are used for the needle.

Star Spiral

Curved lines are embroidered with silver and blue glassware of different sizes: larger are located closer to the center. Used the main seam "Forward needles". On the stitches of the "Pyramid" lines are embedded from single silver sequins of 5 mm in size with fixing silver beads of size 10. Pyramids are also scattered outside the pattern to increase it. The center is embroidered with stitches "Stitch". Some glass tubes are crowned with silver sparkle. Other are placed rhinestone with the central hole.

These patterns can be embroidered on a wide skirt for the evening or with the necessary changes on one shoulder of the evening dress with sleeves - in this case, the lines extend the sleeve.

This pattern can be arranged on the front with the transition to the back or on the thigh of the tight skirt or place in the center of the decorative panel with the space plot.

Sultan

The effect of the shade gives beads with a color middle on silver sparkles. A variant of the seam "Forward needles" for beads with sparkles was used. Sultan was embroidered from the external ends to the center. If you start work on the base, the effect will turn out otherwise, depending on the location of the embroidered pattern on clothing. In the photos, it can be seen how it changes with a rotation of embroidery by 180 °.

How to choose your drawing for embroidery

For finishing, you can select any pattern taken from the Internet and print it. There are various methods:

Using tracing. The drawing is copied to it, then slightly crushed and attached to a plot requiring decoration. Embroidery straight tracing. Then it is neatly removed.
With the help of special markers and pencils.
With the help of Portnovsky chalk or its powder. According to the contour, the figures make holes and rub the coloring substance in them. But it should be careful not to spoil the fabric.
Translation of drawing through a special copy of textiles.
With the help of iron and transferable pencil. A scheme for embroidery beads on clothes, circled by this pencil, is copied to the fabric when exposed to a certain temperature. Choosing such a method, select the temperature mode as accurately as possible.