Only at first glance it seems that the pattern is simple and all long ago known. In fact, the caps from it turns out so diverse and interesting that I want to get them all. It looks stylish and very interesting, in the images behave delightfully. Such caps are perfectly combined with all overhead clothes, even expensive fur coats in no way reduce the cost. It is necessary to say that they are amazing in combination with all the favorite coats of "Cheburashka" from the artificial fur to which, by the way, is quite difficult to choose accessories.
The sewer also reminds that we knit beautiful and diverse views of the coat for women with the pattern "Rice", be sure to look, a lot of models.
The fastest in knitting cap pattern "Rice"
The fastest in knitting the hat is when you just chose one simple pattern (rubber band, English gum, molding-rice) ... and drive almost all (and then all) part of the web in one pattern. Starting from the top - in each row, we start to subscribe loops, and when 15-20 loops remain on the knitting needles - we stretch the thread through them - and just tighten them into one bundle-point on the back of the head. According to this principle, a cap in the photo is connected below - (25 rows of the knitting pattern of "rice" ... and 15 rows with irons with reduction hinges).
Step 1 - Start Knitting
First, we knit the gum (in 12-15 rows) and further (without adding loops on the knitting knitting knitting knitting caps already knit. We get a model similar to the photo of a purple haap above.
Or after tiering the gum, we can add loops on the knitting ... and our canvas will start expanding ... and we will get a model lush in the volume of the caps (like on a pink model with a photo above).
An important rule of adding loops.
When adding loops when viscating caps with a pattern, only one thing is important - the total number of hinges on the needles should be divided into the pattern of the pattern (on the number of loops that are repeated in the pattern image) ...
For example, the report (repeat) of our pattern is 8 loops ... So the total number of hinges on the knitting needles should be divided by 8 ... for example, it should be 160 ... or 168 ... or 176 loops ... (edge-edge loops do not go counts).
Step 2 - the main binding.
Next When the hinges are added to knit the pattern ... Repeating reports ...
Patterned canvas drive on rows 40, if you want the usual size of the cap ... (then it also depends on the thickness of the thread) Tracing on the head ... In the process of mating, you yourself will understand when you have enough to drive in a straight line and it's time to narrow the cloth on the top. (You can drive such a patterned web longer so that the cap was higher ... or finish earlier that the hat flows down the head, and not sticking out or hanging - everything is on your taste)
Step 3 - Completing the knit cap.
Then when our cap is approaching the back of the back (or to the length of you) ... We begin to close the loops of 4 (or 6 ... or 8) in each row - the more you close the loops in a row, the faster your mating will end. Since the mating is considered to be completed when 16-20 loops will remain on the spokes
Important relief rule loops.
We know that the hinges on the knitting needle becoming less if two hinges are pronounced together (as one) ... But that the disbuting of the loops is uniform - you need to do this to the disbuting on any places ... And in certain sectors of the caps ... (so that these groaning places are on the same distance from each other). That is, the whole circle of the cap - divide on the sectors (as a knife divide a round cake on equal slices) ... sectors usually even number can be 6 ... or 8 or 10 ...
If you have a hat with a pattern (in which some picture report is repeated) - then the drawing itself and can be the sector ... then we do the blasting in a certain (on your choice) the place of the pattern - and so in each repeat patterns they are tightened together two loops as one.
For example, we have 160 loops on the knitting needles - and we reached the top of our caps and we need to do a blast. We decide to relieve uniformly in 10 places of each row ... So you need to divide our cap on 10 sectors.
Then we divide 160 to 10 we get a number of 16 ... (that is, the cap is mentally divided by sectors - 16 loops in each sector). And then we ...
In our first, our reductive row will be at the end of each 16-cable loops to ligate two hinges together (that is, every 15th and 16th and 16th, we draw together and check as one).
In the second duplement row, the loops in the sector remained one less (and we will already draw together each 14 + 15th loops in a row).
In the third grooved row - in each sector, the loops became even less (and we will be signed together each 13th and 14th loop together).
And so on ... While the total amount of all hinges on the knitting needles is 10-15 (on thin threads 20).
All - now you can complete the mating.
We collect these remaining loops on a thread ... We tighten the thread collecting all the loops in the beam and tie into the nodule (the ends of the nodal are chosen inside). We close the rear seam of our cap ... and ready!
Demi-season hat with a dual rice pattern - MK video
By this video, you can link the cap with an elongated top and also the fitting head. Related from rented yarn 70% - cashmere, 30% - Silk, microcipettes 100g / 520m (3 yarn), knitting needles No. 4; 4.5 Size flow 60cm - 100g.Fluffy hat from angora with a lining
The universal model of the caps is suitable for both women and girls. You can add Pompon at will. For some reason, this hat is associated with the Snow Maiden and the Winter Fairy Tale! Size 52-56. Perhaps up to 58. Detailed description. Tie even a starting master. Spokes: 2.5 40 cm Yarn: Wool Sea Rabbit Angora (gone 3mot - knitted in 3 yarn) and Yarnart Super Merino (half of the day).
Women's knitted hat
A very feminine small hat cap is associated with a grid. For knitting, take the melange thread of medium density and needles No. 6.
How to tie a female hat with a rut?
1. Dial 21p. And tie the heads in the first fields.
1r.: * 1 Persons., 1 izn. *
2p.: * 1 izn., 1 persons. *
3r.: Knit as a grid, but do not take a row to the end, they check 8p, we throw the working thread on the front. The side, a loop with the left knitting needles, we move to the right, throw the thread on the involvement. The fact that would be shutting a rebuilt loop and move this loop back to the left needle (such a job is necessary so that there are no holes), turn the work and take the reverse row by the grinding.
5 and 6r.: Putanka
Repeat from 1 to 6 row until the short side length is 46 cm. Close the loop.
2. From the edge n. Type 72p. And knit the Tool with a pearl viscous height of 16 cm.
3. Start the relevant. To do this, make markers through 13p. Adjusting to the separation, check on a 3p. The mix of that loop (facial or invalid), which goes in order of the rope. If in front of the loops that you will reduce the facial, then the hinges "together" check the wrong. And vice versa.
4. When the 10-12p remains, drive them and secure.
When you knite cap in the form of a hat. Try to knit enough tightly so that the product holds the form
Bini Cap Pattern Rice - Master Class on Video
How to tie a cap pattern Rice - step-by-step description for beginners
You will need:
- 100g yarn (wool);
- Spokes number 4;
- needle;
- centimeter.
Completing of the work
We start knitting from the gum "Cartridge Tape".
Double-sided gum fit simple, but it looks superior and elastic.
Dial the loops, the number of which is multiple 4 + 2 edges.
For example, 98 loops on the sample.
It knits a gum facial loop.
1 row: 1 chridge., 3 persons. Pretty, 1 we will remove (thread before work), 3 persons. Potted to the end of the row. Complete the row need 3 persons. 1 remove, 1 chrome.
2 row: 1 chrome, 2 persons., 1 remove, 3 persons., 1 remove. We repeat to the end of the row. At the end of the row: 3 persons., 1 remove, 1 individuals., 1 chrome.
Knit alternating these two rows to get such a canvas:
In the width of the gum will be like you like. In the example, it is 6 cm.
Further, the cap ties pattern rice.
1 row: 1 persons., 1 out., 1 Persons., 1 izn.
2 row: 1 persons., 1 izn.
The second row fit in the drawing, as loops look.
3 row: above the front loop, knit the involnery, and above the invalid, on the contrary - facial.
4 row: in drawing.
Facial loop:
Painted:
We will connect another row in the drawing, and then confuse the loop: above the facial is an invalible and vice versa.
Tie the needed caps.
Removing the loops, keeping the pattern rice. This is done on the remaining five centimeters of the cap.
Divide the approximately the caps of the cap 5-6 of the same parts. In each of them, knit 3 loops together - where the loops are confused, knit above the wrong one.
Three loops that need to lie face.
This looks like the blade
Next, you need to make 5-6 grades.
4 rows Check the pattern rice.
Further we do the outbreak in 5 ohm row, and then again 4 rows with a pattern of rice.
We do so until 20-25 loops remain on the knitting needles. But you can leave more loops if you want to make a top of it.
35 loops left here.
Loops transfer to thread with a large sewing needle and thread.
Our cap is a pattern of rice, this is such a beautiful macushkin.
The last step must be sewed with a hat on the seam.
You can link the cap pattern rice with arms with a tit.
In the modern world, the hat is needed not only to protect against the cold. This is a constant attribute of the image that makes it exclusive. Make a fashionable hat can properly selected style and pattern.