This lifehak not only allows you to make a thing from the pullover or the jamper, but also works as an additional way of decor.
In this way, you can remake the jumper or pullover in two cases. The first - when you just want to find a thing on a clagging instead of things without it (you need to consider that the converted thing will become about 2-3 cm). The second is when the jumper / pullover sat down in width after washing or became small for another reason: then you can redo it in the sweatshirt on the buttons on top. By the way, you can make comfortable clothes for pregnancy.
Best of all this method is suitable for things from not too thick knitwear, both woolen or acrylic and cotton.
You will need:
- jumper or cardigan;- material for wrapper (can be taken, for example, thin cotton, suitable in thickness and texture knitwear);
- the right amount of buttons;
- cloth scissors;
- Iron;
- Sewing machine and thread.
STEP 1
And the reselled thing, and the material for decoration before work, wash and dry. Find the middle of the jumper / pullover and cut it exactly along this line.
Step 2.
From the fabric, take 2 identical stripes. The length of each - about 5 cm is longer than the length of the plus line, the width is at your discretion, in this case - 5 cm.
Step 3.
On each strip, they begin with an inside out of about 1.2 cm along the long side.
Step 4.
Print stripes to Jameper, as shown in the photo. Rates from the edge of about 1.2 cm, laid the lines, sewing the fabric.
Step 5.
Wrap the stripes inside. The upper and lower ends also wrap, as shown in the photo, start and pinch the pins. Success stripes and, if desired, shoot.
Step 6.
It remains to make a loop and sew buttons.
P. S. If you want to sew buttons-fangs and mounted loops, do it before making the first line (see step 4).
