Dreaming of summer, Sew your wonderful corsage from a bright flower fabric! Thanks to the mannequin, it will be perfectly sitting on your figure.
You will need:
Bra, satin with floral pattern OK. 60 x 90 cm, lace with festons one by one edge 1 cm wide, length = waist girth + 10 cm and lace with festons one by one edge 4 cm width. 50 cm, 3 buttons, threads for sewing, zigzag scissors.
Cutting:
On the mannequin to wear a bra. On the bra place the side seams at a distance approx. 5 cm from the suture of the rectification of straps to the back. Measure width through the highest breast points from one side seam to another. Carry out 1x before the corsage appropriate + 2 cm on the side seams and a length of 22 cm.
Clean 2 parts of the back, width = from the right side seam on the bra to the fastener + 8 cm, 22 cm long.
Clean the rush with a length of 80 cm, 5 cm wide. Ryusha long cuts cut out with scissors "Zigzag".
WORK DESCRIPTION:
STEP 1
Before the Satina, it is sharpened to the bra so that the top edge of the bra performs 1-2 cm. The upper slice is transmitted from satin at the same time to be 1 cm on the wrong side.
Step 2.
Similarly, in the middle of passing the transverse fold of the depth of approx. 1 cm, make sure that the fabric smoothly fitted a cup cup, to change the depth of the fold.
Step 3.
One detail of the back, while exposing the side and upper sections, pouring to the upper back edge of the bra so that the top edges of the back and the transmission is exactly combined.
Step 4.
Split side seams and backrest. Repeat the same with another detail of the back.
Step 5.
Sew filthy on the front: under the cups of a bra brings the outlet to the lower cut.
Step 6.
On the back to wrap inside the edge of the cut so that the allowances appear on and under the clasp.
Step 7.
Seams in the field of the bra sew manually, the rest of the seams and edges are stirred on the typewriter. On the back to sew buttons.
Step 8.
Manually sew the lace on the top edge of the bra. Narrow lace on the bottom edge to shoot on the machine.
Ryush: In the middle of the strip for Ryush to see 2 long stitches. Ryush to dwell on the thread line and put on a bra, as shown in the photo of the model.
ADVICE
● If you do not have a mannequin, ask your girlfriend to help you: remove measurements, putting out a fabric, etc. To do this, put on the bra on a thin underwear and ask a girlfriend to simulate the corsage, as described in a step-by-step course.
● On the straps, you can push the same lace rushes as the top edge of the bra. Either replace the straps from the bra on elastic lace in black.
● Such a top can be sewn for holidays: from lame fabric, for example. In this case, replace the lace on the strips of the main fabric, and also take additionally to the parts of the straps of 4-6 cm wide, turn into the hand and remove the pins using the pin. Then, after modeling on the mannequin, reflect the straps and the trigger of the strand from the main fabric from the inside. Straps can be sewed and wider and enjoy them in the sewing places to the top.