The 80s presented us with an unusual sleeveless option called a bat, applicable for any style of dresses. These dresses enjoy tremendous success, because they are easy to fit, suitable for any situation, adjust the figure and give freedom.
|
|
|
Custom patterns in its size
Pattern of a dress with a sleeve bat reminds a rectangle to which the sleeve was added. And the most important thing is that the sleeve is not necessary to paint separately and spend time on the sweat, although there are exceptions here.
You can sew a dress without a pattern, encounters for example an old sweater, but you can simulate yourself or find in mod magazines.
In any case, without taking into account its parameters and knowledge of some subtleties, there will be no beautiful outfit.
- As a basis, you can take the pattern of your favorite blouse and lengthen it to the desired value.
- On the existing pattern of the dress, you can also adjust the length of the skirt and the size of the sleeve, as well as the neckline.
- Be sure to recheck the length of the sleeve and the width of the thigh. It is calculated according to the formula 1/4 of the hip plus 1 cm for free fang.
- Decide with a long cuff. It is usually 13-17 cm. From the lower edge of the sleeve, the length of the cuff is measured, the parallel line is performed and is cut off extensive. Double cuff is modeled separately.
- The backrest and in front of the "Bat" model cut out, using one pattern.
- From the length of the outfit depends on the Fabric Method and it is equal to two lengths of the product with an increase of 20 cm.
- Do not be lazy to decatize the acquired segment
|
|
|
|
Fabric selection
For tailoring, the bat is used any, but not very thick matter. Heavy tissue is much weighting the silhouette and achieve beautiful falling folds is impossible, so preferably choose soft, slightly elastic and well-dramatized swimming fabrics.
|
|
|
|
Dress-case
Let's consider an example of a sewing dresses with a single sleeve without using patterns.
Cutting and tailoring
- Fold the matter in a person inside.
- Also make a blouse and align their folds.
- Call the contours.
- Runing the girth of chest, waist and hips, cut the back, adding points on the seams.
- Discarded the resulting detail of the back on the segment of the fabric and cut out before, deepening the neck
From the remaining matter, make a loan. Cut the strip, and then take it and remove it.
Before and backing together with an invalid up.
On the waist on the sides, place the bumps and secure the pins. Sew details.
Obtachka
Severe a neckline of the fliesline and fabric, moved to the cushion line of the neck of the back and transition.
|
|
|
|
Details of the hopper Still and the outer edge of its edge.
|
|
Attach the shock with pins to the neck and take the machine.
Slesh, then suffer your hands.
Tunic's dress
To build the pattern of the tunic dresses, you need to remove the measurements:
- Breast girth and hips;
- Length transfer to the waist and waist length;
- Boc height.
The neck on the pattern is wide. You can simulate it to your liking, even make asymmetric.
With a short sleeve
It is not necessary to hide beautiful handles under long sleeves. For a warm season, you can sew a dress with a short sleeve bat.
Model This dresses have no dilated, so the material should be dense and elastic to beautifully facilitate the body.
For the 44-46 size, you will need about 2.5 m tissue.
The top of the dress is modeled so that it is suitable for all sizes of the chest. And with a long you can experiment.
The patterns of patterns on the fabric assumes the presence of an additional seam on the back, which you can finish the cut.
The principle of sewing is simple. Still side, as well as shoulder seams, if necessary, treat sections. The neck is processed by a slap, and the bottom of the dress is nevertheless.
Cutting Sleeve Dress Pattern
It looks original in the dress bat with a cutting sleeve made of contrast fabric in texture and color.
The pattern consists of one detail of the transfer, two parts of the back and two parts for each sleeve. Also necessary for a solo-rolled neckline.
- Practice cut taking into account points on the seams.
- Stick details, then fold.
- Sust in front and back together.
- Sew coverage.
- Connect the elbow parts of the sleeve with the front and flow the sleeves.
- Make a niza bending.
Pattern Dresses Bat With Cutout "Boat"
In this outfit, the skirt is straight and sleeve with a cuff. Details on the cloth "Walt" are laid out.
Pattern dress with a low waist
Taking as the basis of the previous pattern, you can simulate a dress with a low waist and short bats.
Red dotted line indicates the cut slicer line. Skirt here is straight. Its width is equal to the volume of the thighs.
It is better to draw in two receptions. First fold the fabric and output the bodice, then fold the cloth in the width of the skirt and spread it out.
Keep about the stock of dresses with a battered bat sleeve. They will use you more than once.
A source