This article will consider the pattern of the Cocoon dress for beginners of the couture, and therefore the difficulty level of sewing in this case is simple.
Before proceeding with the pattern, I would like to pay special attention to this moment as choosing a size. In the considered example of PG about 10 centimeters, PB about 5-7 centimeters.
The model will suit the French representatives, regardless of their type of shape or age group. For sewing, you can use any cloth, however, it is still not recommended thin silk.
The set of the pattern includes the following details: "spin shelf", "barrel-siz", as well as "burlap for pocket", since our dress model will be with pockets (Fig. 1).
The size of the consumable tissue will be about 2 meters. To minimize costs, it recommends using a lining fabric for the pattern of "burlap for pocket".
Despite the fact that the level of sewing this dresses is suitable for not highly experienced tailors, during the cutting you still have to face some difficulties. Therefore, we propose to disassemble the cutting dresses "Cocoon" in more detail.
Let's proceed to the manufacture of patterns. Such a part, as the "spin-shelf" must be made in two variations, and therefore cutting the shelf with a neck and a deflection at the bottom of the sleeve and a back with a sprout and a convex sleeve.
Patterns of such parts as the "sorption barrel" and "burlap" are universal for all types of figures. Participate attention should be paid on to the days, which teachers are often mentioned in sewing courses. First of all, it is necessary to apply the lamp on the pattern, and then put tanks on the fabric, without forgetting about the lersions on the allowances of the seams of parts of the product.
Manufactured Pekal, it is necessary to fold twice the fabric, thereby aligning the edges and arrange them on the cutting table in parallel.
Next, we proceed to the patterns of the shelf and the back, we put them with the "currency" (Fig. 2), such that the shelf is semi-fell to the seeds of the fabric, and the middle seam of the back - to the edge. Detail of the "barrel-porg" must be made in 4 copies, and "burlap for pocket" - in two, since we will need to put the flow to the collar collar or carp the burlap on the reversal. Remains will be useful to us for the pattern of cleansing.
For points, we leave one centimeter one centimeter, except for the sprout-neck, since it must be painted behind the stroke line. To enjoy the bottom of the dress, you will need three centimeters.
Separately, it is worth paying attention to the shells for processing the sprout, neck and lower sleeves (Fig. 3). You should cut them out through the same patterns that were used for the shelf and the back of the dublerin, and remember that the stacks on the seams are not needed here.
First of all, it is necessary to circle the incision itself, which will continue to be processed, as well as sections that are partially adjacent to it. The width of the details of the sheets should be up to 5 centimeters.
Next, obtained from the dubbing of the wrapper should be decomposed on the wrong side of the fabric, which remained after the cutting of the main parts.
After that, we need to glue them and cut. I would like to pay special attention to the fact that cutting is necessary with the allowances on the seams.
We also recommend you to get acquainted with the video lesson for novice tailors on the topic, how to handle the neck with covers?
If the fabrics do not have enough fabrics, the solution to the problem may well be cut with subsidies.
How else to sew the dress "Cocoon" with pockets?
One of the most important roles in the question of sewing the cocoon dresses are allocated with seams, without which it is not possible to collect the product.
We proceed to the processing of the middle seam of the back with the "lightning" (Fig. 4), further to the seams of the shoulder sleeves and fragments of the seams, located on the side, from the cross of blue to Niza. Then we need to process fragments of the seam at the bottom of the sleeves, which are clearly represented from the bottom to the greenest mark. We do not miss sight of the two bell-pods, which need to be used together - from the cross-green cross to Niza. It is also important not to forget to spend the seams of seams, after which it is to begin wet-thermal processing.
After all the above-mentioned seams were processed, processed to pockets. With the "Burlap" part, you need to turn the entrance to your pockets, this gap is specified from the cross of blue to the red mark.
Next, we feed the pods-seats, connecting them along the convex cuts - from the crossed green, go to the burlap and after which, we return to the green mark.
It remains only to handle the neck, the bottom of the sleeve and the bottom of the product.
As you managed to make sure this process, though it is slightly confused, but not complicated. We assure you will certainly succeed, even if you don't have much experience in this matter. The main thing is not to save much on the fabric.