Good day! Ahead of the vacation time, seas and beaches, and what can be more pleasant than to disconnect from everyday fuss and plunge into the Azure Sea, or not azure, or just a river ... The essence is not in that, and that the beach is still needed in Throw, and this is "something", dressed in a swimsuit, we will create today.
As a rule, newbies frighten the complex patterns and tangled clothing construction processes.
Today we sew a beach tunic, do it yourself very quickly in the easiest patterns!
Today is this post for you! Since each of these models of tunics can be sewn in half an hour!
How to quickly sew a tunic pattern
Below in the photo shows the easiest model of the tunic, the bottom of the tissue is taken by a 150 cm wide and 65 cm high, the two upper angle bend or cut the semicircle, as shown in the figure below:
We make a sovereign and ingested in it the lace from the same fabric, the length of the lace must be adjusted during the fitting, or leave long strings to adjust the length during tunic socks.
Laces make a 3 cm width of 3 cm and 50 cm long.
You can not cut off the corner with a semicircle, but beatened as shown in the photo, fly at a distance of 1 cm from the bend - it turns out to be a row.
It dresses such a tunic with simple winding around the figure, very comfortable, practical.
It is better to sew it from the fabric, which does not roll the cut, if the slice crepts, then you just need to process all the edges of the rectangle with double bending.
The whole sewing process will take you no more than 30 minutes!
And you can make a tunic in a similar way, which will close your back (unlike the previous model). To do this, we take a tissue with a width of 150 cm and a length = the desired length of the tunic, with both upper corners, sew a laughter, as in the figure below. The edges of the rectangle are also processed, so that the cut outdoor does not face.
The next model is as beautiful and simple!
Behind it, we take a cut of a tissue 150 cm wide and a height of 75 cm (paragraph 1 in Fig. Below), we fold the cloth twice in such a way that the tissue fold is from above (paragraph 2 in Fig. Below).
We measure the distance between the right armpit and the bottom point of the neck on the left (for example, 40 cm). We carry out on the oblique in the upper left corner (left angle - if we look at the drawing, on the finished product it will be the right side) a straight line of 40 cm long. Cut off the resulting triangle.
We flash the straight line of both layers of fabric on the left side in the drawing.
We measure the semi-cuddle of the thighs, add centimeters 8-10 to the freedom of plantation (see more detail about the gain in clothing), lay the resulting magnitude from the left edge of the tissue and lay another vertical line, it will form the second side of the tunic. (paragraph 3 in Fig.)
We process the remaining unprocessed cuts, bending the allowances on the wrong side.
Tunic is ready!
Sew a beach tunic half
At the heart of this model, the tunic is a semicircle - a half-fiber, from which dried skirts and dresses are sewn, but no less good tunic. Now we will analyze the details of this process.
For such a tunic, it will take a cut of a tissue with a width of 150 cm and a height of 150 cm - the square, which we fold twice, so that the rectangle is with the sides of 150 and 75 cm, the folding of the fabric is above. (Fig. 1)
Fold the fabric again twice so that the square and from the top left corner cut the semicircle (Fig. 2) - this is our neck, the neck can be any depth, start cutting out with a small one (for example, the radius take 15 cm first, if necessary - then Rapid the neck).
There will be two seams.
Based on the size of your neck, there will be a different width of the shoulder seam (Fig. 3), for example, take 5 cm, retreating from the edge of the neck along the folding line of 5 cm, then postpone 20 cm - this is our prum. Cut it out (just cut the cloth in the collar). Processing the sections of the armhole, bending the allowance on the wrong side.
Sew a tunic fly mouse. Hard
For such a tunic, we will need a light translucent fabric (chiffon or silk), so that the tunic looked light and flight (as a "flying mouse").
The amount of tissue depends on the desired length of the product, with a width of 150 cm we can measure the desired length (for example, 90 cm), then the height of the tissue take 180 cm (two lengths).
Sewing process:
Fold fabric in half, fold tissue from above
In the center cut the neck cone
We measure the semi-grapted hips (how to remove the measurement read here)
From the center of the fabric, we postpone half of the semi-coupling (a quarter of the girth of the thighs) + the increase to freedom, we celebrate the vertical - these are our side sides of the tunic.
We make sobers and stretch the lace (I wrote in detail about this process when she sewed this dress from knit oil)
The area for hand can also be fixed, from the upper fold of the right and on the left, retreat 20 cm, and we flash some distance (for example, 10 cm), so that the place for invaling the hand is designated.
Here is another model, only in length in the floor:
Another simple caustic tunic
For this model, we will need 2 m tissue with a width of 150 cm, the fabric can be both stretching and lighter.
We measure chest girth. Cut the strip of the tissue with a length = chest girth and 20 cm high. We collect into a fold in the center of this strip, fixing the long braid from the same tissue, I connect both sides of this strip in the center and sew them if the fabric does not stretch, then you need to insert a secret zipper .
Next, we cut two rectangles of the desired length (the length is measured from the line under the breast). Measure the centimeter half-crush the horizontal under the breasts (in fact, half a cup of the foundation of a bra), we put a centimeter in the center of the tissue and draw a semicircle, the perimeter of which = half-drink horizontal under the breast.
We sew both rectangles on the side seams.
Send the resulting part to the collected in the fold, the side seams are noted in the diagram below, they must coincide if the strip for the bondage we caught a solid part, then we note the position of the alleged side seam by pins on the fitting, and we feed these points with the side seams of the main detail of the tunic.
Pattern Beach Tunic from T-shirts
At the heart of this model, the tunic is a T-shirt. We lay it on the fabric and draw new contours, without changing only the shoulder seams and the depth of the neck, if it suits you, we take the armor in the side, and we carry out a large semicircle, it should be a long half of the oval.
The length of the oval depends on the desired length of the tunic. The photo made a blouse, but better and brighter, in my opinion, this model will look if you make it longer.
We sew step by step:
Strip two identical details based on extended T-shirts
We process the section of the semicircle by Zig Zago or insert the allowances on the wrong side. You can get the allowance twice.
Then we sew both details on the shoulder sections.
We process the neck and armor oblique baker.
And now, as shown in paragraph 7 in the figure below, trying to the tunic and fix the position of the "corners of the middle of the passage" (I do not know how to call this part differently, but in the drawing you will understand faster), correct their position and regulate the freedom of landing of the tunic on Figure.
Pattern of beach tunics from oval
As the basis of this model, the oval is taken. I cut it out of the necessary length, the length is pre-measured from the bottom of the neck + 15 cm (so that then these 15 cm cut off the oval from the top, and the length of the length did not suffer).
The width of the oval should be such that she wrapped the figure with a small overlay. To determine the width, measure the girth of hips + 30 cm.
We sew step by step:
Cut off 15 cm from the top of the oval.
We drive the top edge by 3 cm and make a scenery.
We cut the lace with the tape from the same tissue, in the strip width of 8 cm, length 60 cm, in the finished form of the strip width 3 cm. Attay the ribbon in the scene.
Everything. Wear such a tunic with a beautiful belt.
A few more steam tunics
Below, there are still few tunic of the tunic from the rectangle, I will not describe them, I think that the general principle you have already understood.
It seems all these models in different ways, so they deserve attention.
I hope that now we have mastered this simple process of creating a beach tunic and be able to quickly sew and yourself such beauty.
