Pattern of large bra. Girth under the breast 100 and 105 cm.
This model of the bra perfectly models the shape of the chest up to the largest size.
A cup of bra mild without seeds, consists of three parts: the lower part is two parts and one top.
Bretelli wide.
Patterns are given in a natural amount with letters on the seams (at the rate of 0.7 cm for all seams, except for the front; on the front seam of 0.5 cmx).
Patterns are suitable for women whose parameters fit into the limits specified in the table below.
Pattern | THE SIZE | Girth under the breast | Breast girth (by protruding points) |
Blue line | 95F. 100C. | 98-102. | 117-119 116-118 |
Black line | 100e. 105С. | 103-107. | 120-122. 121-123. |
In any case, it is recommended to first check the patterns on cheap fabric: to cover, fit, try, if necessary, to make adjustments, clarify the length of the side of the bra, given the degree of elasticity and the appearance of the fastener, and only after that it starts to sew.
Recommendations:
Bras of large sizes are desirable to sew from dense tissues, as a bra from thin materials (guipure, thin knitwear) will not support a big chest well.
The back is desirable to draw from the elastic linen with a high content of cotton for maximum support. And more size, the wider the detail of the back (barrel).
The clashes are wide, not less than 3 hooks on 3 positions.
In large sizes of bras, the width of the straps is recommended to expand to 3-5 cm, since narrow straps deform the muscles of the shoulder, disturb the correct blood circulation in their hands, which leads to discomfort, fatigue, etc.
A cup of bras are made on the lining. For this purpose, fabrics are used, combined by properties with the material of the top of the cup: elasticity, density, etc. and do not forget that the best option for the human body is Natural Materials that meet all hygienic requirements improve skin microclimate and do not cause irritation.
According to statistics, underwear, created using 100% cotton membrane, is recognized by the buyers of one of the most comfortable.
Details of lining Lit for major details.
Sewing Tips:
First We collect the lower part of the bra braid, which consists of two parts.
Then connect the upper and lower parts of the cup.
The upper sections of the bras of the bra can be treated with narrow lace, openwork elastic or bay bay.
The leather side of the bra is designed to use elastic tissue. In order for this item not to be small, add a few centimeters to the barrel length. Girth of a bra (the length of the barrels) finally specify on the fitting, considering the elasticity of the material and the magnitude of the clasp.
Connect cups with barrels. The suture of the appointment is closed by baker. In the resulting pocket, you can insert locking plastic bones.
The upper side cut of cups and backs (barrel) is processed by a lining openwork elastic or elastic braid.
Under the bottom of the bra, lounge gum is facing.
You can use a wide gum (see photo), it will serve as an extra support for big breasts.
To the protrusion of the top detail of the cups are driving straps.
The straps can be both combined (gum plus beaken) and solid (only elastic or only beaken).
Also straps can be sewed from the main fabric. In this case, the length of the straps will be 40.5 cm for girth 100 cm and 41cm for girth 105 cm. Finally, the length of the straps specify on the fitting.
Do not forget about the existence of straps regulators. They consist of buckle locks and rings.
Further process the fastener. The finished ribbon with hooks is sold in stores of sewing accessories.
Here, perhaps, everything!
Successes!
a source