For sewing you will need: 2 m of light knitwear.
For the first time to reduce your fabric
In a long rectangle,
Approximately 68 x 28 cm long
(I- 5'3 "and medium physique,
so you can
Set up accordingly).
You will also need two tie.
Cut 4 strips of fabric, which are 3 x 24 inches.
With two strips of fabric on top of each other,
on the right side together
cut one end of the strip,
So that they come to the point.
Attach them together and
Sew with approximately taking into account centimeter seam.
Cut an excess cloth around the point
and turn inside out.
Now fold your long rectangle in half
with a short end together
And cut your loans.
Reduce the hole less
What do you think it should be.
Elastic knitwear
Therefore, you need a very small hole.
If it is too small,
You can always cut off more
Here is the measurement,
which I used for my prugi.
If you wanted just a vest
You can stay here.
We are going to insert ties.
Cut a straight line
From the bottom of the fabric
At the bottom of the armor.
Now we are going to sew a cut,
What just did,
We will insert one tie on each side.
Open fabric so that the right side is up.
From one cut edge side to yourself
Put one tie in 6 inches
from the bottom of the prugi
Edges are lined up.
Place another cut edge from above,
On the right side together, and the PIN code.
Sew
With 1/4 inch seam manual.
Repeat on the other hand
with another tie
And everything is ready!
The most wonderful knitwear is that
What there is no need to finish the edges.
So if you want, we carry it like a vest,
Just tie a bow or knot on the back. . .
If you want to wear it as a wrap,
Pull the sides, and tie the knot in the front