Our editors came to the horror at thought, how much useful things we threw in vain! And all because they did not know this stunning method of repairing plastics! Fortunately, now we know him, and with pleasure we share with the reader.
If the nursed soda broke down with the superclaim will come to the rescue. The combination of these two cheap substances gives a stronger connection.
And this is our broken thing today.
And this is our broken thing today.
Refine. First, easy fixation of moving parts.
Tightly connect and keep.
We sprinkle on top of soda.
glue.
On the other hand, similarly.
Apply from above soda.
So you need to repeat several times, it will be very firmly. Glue-soda-glue soda.
Our hero is renovated.
Now it will be broken, most likely hook.
But the fact that I reinforced yesterday is a motors of the washer. Rusted, Pogwan.
T. K. The corpus is smeared - it had to cut it. I smeared, cleaned contacts, brushes. Collected and sealed back with glue soda.
We repair the monitor of soda!
The inner sleeve (according to which the monitor "drives" with the slope horizontally) partially collapsed in the place of attachment to the rack. I do not know what was the idea of engineers, but on 2 screws it is holding, without a small, 7-kilogram display.
It is escaped with meat! For treatment, either a donor is needed, or secure the rack "tightly", or something to pull somewhere. Epoxy will not take, as it is plastic.
Shards simply throw away, they will only interfere and fall asleep damaged soda places.
Kapa / applied sufficient for wetting the entire volume of soda cyanoacrylate in the people of "superclas". The glue should be not a gel, but the liquid "classic". Polymerization occurs instantly, the mixture solidifies completely after 2-3 seconds.
"Patch" is very durable, it is more complicated than the original plastic. It remains to polish and drill holes for screws.
Everyone is here.
