Blouse for ladies with full hands - cut and sewing

Not all ladies can wear sleeveless clothes. To cover full hands Sure a model with a single sleeve. They are suitable for any occasion. Modern young ladies prefer to wear with a flower pattern, as well as in a monophonic version. Phased tailoring of comfortable products with whole-circuit sleeves.

First you need to choose a cloth. The easier, the better. Do not choose bulk material, with intricate pattern sequins or embroidery.

Removing measure:

• The chest circle is measured at the highest points of the chest and blades;
• The length of the product is measured from the 7th cervical vertebra to the lower edge;
• The length of the sleeve - from the point of connection of the forearm and shoulder.

For sewing, the basic pattern will be required, which is available in every dressmaker. When loose do not forget to make allowances for freedom of movements at the bottom of the parts, starting from the sleeve - about 10 cm for thin tissues.

Punches on the seams:

• Through the neck - 1 cm;
• on the seams - 1.5 cm;
• At the bottom of the product - 4 cm.

The right landing of the shoulder can be determined by the blouse that sits well on you.

Detail for perfect landing

This silhouette may have a problem - under the arm, the fabric will be strongly stretched, and the breakdowns on the seams in the fields of rounding will begin urgently frowning. In sewing a blouse for complete ladies will increase the risk of breaking several times. To mitigate the tension, we carry a lasty in the form of a neat rhombica from the same fabric.

When sewing, the peaks of sharp angles should be directed to the bottom of the blouses and sleeves, and the upper part of the stupid is to connect with the corners of the connection and the back.

The first fitting is made without a lastician. Make sure that the sutures of the sleeves and shoulders are not shifted from their places.

1. Next, the side, shoulder, upper and lower sleeves should be stuck. Seams smooth and spend.
2. Lasting in a subsidement only after stepping and smoothing the seams. The edge of the lasty is to be folded with a cutting shelf and backs inside the face.
3. Turn the rhombick from the blouse so that in the corners of tolerances on the seams were the smallest.
4. Seam Lastovitsy decompose on both sides and smooth the iron.

a source