Simple and spectacular longline skirt - Building options

The Yarus Skirt is a surprisingly multivariant product. It is believed that such models are very full. This is not entirely true. Of course, meters of lunutly wounded fabrics can successfully wrap a thin flat figure, visually adding the desired volume, but also the full women should not give up the skirts of the tiers, fearing to get the "Baba to the kettle". "Playing" with a total length of tiers, the assembly coefficient, selected cloth, you can create a variety of silhouettes. Therefore, we argue that such a skirt will advise on the figure of any type: at least on the "pears", at least on "rectangles", it is important only to choose the lines.

Multi-tier skirt

Yarusami skirt - Basic principle of construction

A long-term skirt is a slightly complicated version of the simplest model - "Tattanks", a skirt with one seam with a waist assembly. Since there is no need to build an exact pattern, and the cut details have a look of rectangles, it is really lighter. And if you thoughtfully come out not only to the calculations, but also to the selection of tissue, the skirt will not only be free and comfortable, but also unique, and beautiful.

"Flying" Yarry Skirt

Often, do without constructing at all, performing the cut directly on the tissue. The measurement from the figure - the girth of the thighs is used only to determine the width of the first tier, the width of the remaining tiers is calculated on the basis of the first. The extent of the tiers depends on their number and total length of the skirt.

1. To the girth of the hips (about) add a small convenient increase for free fickling. The more about, the greater the increase, on average two to six centimeters. Received the width of the upper tier - L.
2. Select the coefficient (K) of the assembly: from zero to "how much you need." Typically used range from 1.1 (barely noticeable superstitution) to 2.7-3 (very thick magnificent gym). For large coefficients, for example, 6, it will be difficult to flash the resulting assembly even on a very fine tissue.
3. The width of the next tier, L1, is calculated as follows: L1 = L * K.
4. To determine the width of each subsequent steps, the previous width is multiplied by the selected coefficient.

So looks like a pattern for a longline skirt

It's all! No more calculations do not need. It remains to cut the cloth on the strips and sew the product. The top of such a skirt is most convenient to collect on the gum, although the hard belt on the waist in combination with the zipper is possible.

Yarusa skirt on the coquette

In order not to add extra volume hips, the top of the skirt is better done on the coquette. For this option, you will still need the minimum cutting skills. On your basis, direct skirts mark the coquette line. This line must be selected in the place, the most advantageous precisely for your shape. There is no accurate instructions on the width of the coquetki, in each case it is its own: approximately from 5 to 25 centimeters. Cut the sequetka detail from the base and close the outtur. Now it remains to calculate the tiers by accepting the lower cutter of the coquetka.

Fabric selection

The most popular fabrics for the long-scale silhouette tier skirts are lightweight, flowing, beautifully drape: chiffons, organza, sewing, batter, thin sits. It is such materials that allow you to get a "flying", and not a static image. But the longline principle is suitable for warm skirts of heavier tissues: dense costume, thin twis, woolen. In this case, it is necessary to reduce the coefficient of the interaction, and wearing the finished skirt with the adjacent riding to avoid the impression of heavyweight.

Yarus skirt: Degde and Raduzhny effect

Height of Yarusov

The height of the tiers is selected depending on which visual effect I want to get. The following options are most harmonious:

• Uniform tiers of the same height;
• an increase in the height of tiers from top to bottom;
• Reducing the height of tiers from bottom to top.

In the last two cases, it is easy to create a very expressive gradient color transition using a slightly different tint fabric for each subsequent tier or in rainbow colors.

Width Yarusov

Not necessarily the length of each tier to count with the same coefficient! If for the highest to choose the coefficient of 1.2, and for the lowest - 2.5, the skirt will have a spectacular "scope". The length of the alert can be 5 meters away, and 15.

Lace Yarus Skirt

If the minimum convenient extension is made not only at the top, but also in the area of ​​the knees - a silhouette that resembles the "Gode" cut, but this reception looks good only at high or high slender figures.

Bog of tiers - horizontal seam - will emphasize the area of ​​the figure, which is necessary. So, if you do not want to draw attention to wide thras - calculate the height of rectangles in such a way that the seam is slightly higher or slightly below this place. Conversely: with an unnecessary slight figure, place it in a "strategically important" place.

Multi-tier skirt with contrasting

A small number of high tiers also adds volume, but the skirt, broken on a lot of small "steps", looks easier and, on the contrary, grows the volume.

For visual selection of tiers, make between them inserts from contrasting edge or lace.