1. Create a relief of the bottom: mountains, rocks, grottoes, etc. If you need large elements, we use small boards for the frame. Fix them in the places we need, attaching to the bottom, you can even rely on the mirror walls, as part of the mirror will still be closed with relief.
2. Bear mounting foam, and we blow it on the frame, and on the bottom. After drying, the foam is very increased in the amount, creating bizarre forms.
3. Kanselyar knife cut the relief you need, which wanted. The foam is easily cut, and without much effort it turns out the effect of the seabed.
4. The bottom in the canopies splashes the bottom, you can leave small gaps. I used bronze, copper and gold, alternating on different sites, these colors. Krasnaya in the canopy places in places of foam, which will create the effect of the seabed.
5. Confirm places on the bottom of foam pieces, and also pour them with paint.
6.Great corals. We make a frame of thick wire, immediately forming a leg for fastening coral: from a beam of wire and no less than 5 cm. Balleries take ordinary white napkins - for white coral and red napkins for red coral. We divor into a 50% aqueous solution of PVA glue, and lay the framework with napkins (like during a decoupage), increasing the volume to the desired value. After complete drying, we pass all the corals with the dragon glue (or any transparent pulse of the snap-down) and quickly until the glue is sprinkled with flame foam flames from all sides. White coral is ready. On the Red Coral, you can cut white flakes with paint in the canister. She slightly foaming foam pillows, which will give the coral a special charm.
7. Remove pre-manufactured corals.
8. Krepim shells. They are perfectly held if their edges shove directly into the mounting foam.
9. Opt sand. It can be ordinary sand, colored sand, or a common stone salt, which is toned by paint from the canister (better gold).
10. Remove the additional details that are suitable on the topic. (if they are, or there is a need for them).
11. Create algae. They can be purchased in the store where accessories for aquariums are sold, or you can make them yourself.
12. Turn the wire of different lengths and paints it with green paint from the can. We take green, or brownish shades a napkin and cut it into pieces that would look like algae. On the stand randomly scatter these pieces. We welt the dragon wire and scroll through the stand with sliced napkins. So we do with each wire. Let them dry everything. We insert the obtained algae into the necessary places and form them the desired bending.
13. It will not close our aquarium glass. It should be tightly so for dust to be as small as possible, and at the same time it should be simply open, so that occasionally can rub dust on large details. Aquarium is ready. For effectiveness, you can experiment with the backlight.
